SystemBase launches Eddy v2.5 series

Eddy v2.5 series now runs GNU/Linux 2.6.21 at 400 MHz.

Bünde, Germany, October 2010

SystemBase has recently launched a new embedded module: Eddy v2.5 series. While the existing Eddy v2.1 uses the Lemonix operating system, the newly launched Eddy v2.5 adopts the standard Linux 2.6.21. Due to open source, users can now change options and compile the kernel as the need arises. Eddy CPU v2.5 not only shows improvement in the clock speed of 400 MHz (two times faster than that of the existing version) but it also  proves full compatibility with Eddy v2.1 series. Eddy v2.5 series consists of: CPU module, development kit, WiFi, Bluetooth and device server. For the details, please visit www.trenz-electronic.de.

Eddy CPU v2.5 Module

• 32-bit ARM9 CPU core at 400MHz / 8MB Serial Flash / 32 MB SDRAM
• Pin Header Interface (144 pins)
• 10/100 Ethernet PHY (Auto MDIX) & 4 UARTs
• Max 56 Programmable GPIOs
• Watchdog timer supported
• SNMP 1/ 2 / 3 supported
• Supported by Development Kit including SDK, API
• Operated by Embedded Linux
• Supported by Eclipse based IDE, LernonlDE
• Provides easy-to-use Windows utilities: COM Port Redirector, PortView, TestView
• Compact sized to fit into any hardware
• Operating Temperature : -40 to +85 °C

Eddy-CPU is a high-performance embedded CPU module with powerful ARM9 core processor. This compact-sized Eddy-CPU module provides complete embedded network connectivity, allowing developers and OEMs to design their own customized device that can be applied to almost all hardware environments. Its features include 19 bit address and 16 bit data bus interface to connect external device, PHY interface for Ethernet connectivity and maximum 56 programmable GPIO pins.

Eddy CPU v2.5 Development Kit

• LemonlDE (Eclipse based IDE) included
• All-in-one visual source code editor, compiler & debugger
• SDK including API & source codes
• Easy-to-use Windows utilities provided
  • COM Port Redirector tor automatic serial/LAN conversion
  • PortView for monitoring I/O data and status
  • Testview for evaluating communication
  • performance and stability

  Eddy Development Kit (DK) is designed and built to provide a complete and easy mean to program and customize Eddy modules. Included in the DK are Linux and Windows host operable IDE, LemonIDE API, source code, powerful testing and management utilities to minimize user development effort. From H/W, S/W, utilities, documentations to source codes, Eddy DK provides a total solution to complete user development.

  Eddy-WiFi, Eddy-BT

  • IEEE 802.11 a/b/g Dual Band 2.4/5.0 GHz
  • 64/128 bit WEP, WPA (TKIP with IEEE 802.1x)
  • WPA2 (AES with IEEE 802.1x)
  • Linux 2.6.x OS
  • USB 2.0/1.1 Interface
  • WPS (WiFi Protected Setup)
  • Operating Temperature: -10 to +70 °C

   

  • Pin Header Interface (144 pins)
  • Bluetooth 2.0+ EDR Class 1 support
  • 10/100 Ethernet PHY (Auto MDIX) + 3 UARTs
  • Max. 56 Programmable GPIOs
  • Watchdog timer supported
  • SNMP 1 / 2 / 3 supported
  • Eclipse based IDE, LemonlDE

  Eddy CPU wireless modules enable reliable serial to wireless network connectivity (Eddy-CPU/WiFi Module : 802.11 a/b/g, Eddy-CPU/BT Module : Bluetooth Spec v2.0 +EDR Class1) to user’s devices with robust security. It is equipped with a powerful ARM9G20 (400MHz) processor, 8 MB Serial FLASH and 32 MB SDRAM. Eddy-CPU Wireless modules provide developers and OEMs a flexible yet simple way to integrate wireless network connectivity into their products.

  Eddy-S4/8 Device Server

  • 32-bit ARM9 CPU core at 400MHz / 8MB Serial Flash / 32 MB SDRAM
  • 2 x 10/100 Ethernet PHY (Auto MDIX)
  • 4/8 UART 256 FIFO inside (RS232, Combo (RS422/RS485))
  • Embedded GNU/Linux Kernel 2.6.21
  • Device Server sample application, driver source provided
  • Eclipse based IDE, LemonlDE included

  Eddy-S4/8 Device Server is a board to develop embedded serial control server which connects a number of serial devices to the network. Eddy-S4/8 Device Server integrates a high-performance ARM9 CPU (400 MHz), 8 MB Flash, 32 MB SDRAM and supports two 10/100 Ethernet interfaces. Eddy-S4/8 Device Server has two versions, one of 4 ports and another of 8 ports. Each version is divided into two different models depending on the interface it supports, RS-232 or Combo (RS-422, RS-485). Eddy-S4/8 Device Server enables engineers to develop embedded serial control server which can be deployed for industrial applications. Sample application source code is provided.

  About Trenz Electronic G.m.b.H.

  Since 1992, Trenz Electronic GmbH successfully operates as a development service enterprise in the electronics branch. Its services include design-in support as well as turnkey design which typically cover all steps from product specification, hardware and software design up to prototyping and production. Trenz Electronic is particularly specialized in the design of high-speed data acquisition, high-accuracy measurement and embedded digital signal processing systems based on FPGA and ARM architectures. It maintains long-term customer relationships, characterized by flexibility and technical competence.

  www.trenz-electronic.de

  About SystemBase Co., Ltd.

  SystemBase is a leading developer and manufacturer of embedded ARM modules, interface adapters and communications ASICs. It has been dedicated solely to serial communication technology for over two decades since its inception in 1987. SystemBase focuses on providing the finest industry serial communication devices to system integrators, OEMs and to end-users through its high qualified in-house engineering core.
  SystemBase product line-up consists of integrated circuits, embedded modules, serial multi-port devices, serial converters and serial device servers. All SystemBase products are designed and built with SystemBase engineering technology from chip level up. SystemBase holds a steady dominance in the domestic (Korean) market. Its products have been deployed in 23 countries worldwide to over 7,000 customers in the fields of industrial automation, building automation, telecommunications, security systems, utilities and POS/retail.

  www.sysbas.com

  Press Contact

  Dipl.-Ing. Thorsten Trenz
  Trenz Electronic G.m.b.H.
  Borriesstr. 61
  32257 Bünde
  GERMANY
  Tel.: +49 (0)5223 41652
  Fax: +49 (0)5223 48945
  info%trenz-electronic.de