Embedded ARM Device Server V1.x
Overview
Embedded Device Server modules by SystemBase are small Linux ready ARM based modules supporting RS232, 422 and 485 interfaces at 921.6 Kbps and equipped with an Ethernet interface.
SystemBase Eddy v1.x is not recommended for new designs.
Features
- CPU: 32-bit ARM9
- Clock: 168 MHz Clock
- Flash memory: 4 Mbyte
- SDRAM: 8 Mbyte
- Ethernet: 10/100 Mbps on RJ-45 (for Eddy-S1/TTL on TTL)
- Max 921.6 Kbps serial speed
- Surge Protection on all signals: 15 KV
- Operating Temperature: 0 to 50° C
- uCLinux (Kernel 2.4.x)
Available Models
- Eddy CPU V1.0
- Eddy Serial V1.0
- Eddy DK V1.0
Eddy CPU V1.0
Models | Eddy-CPU V1.0 |
|---|---|
CPU | 32-bit ARM9 |
Pin Header Interface | 56 (26 + 30) |
GPIO Pins | max. 17 |
Power Cons. | 3.3V/200 mA |
Power Input | 3.3 V |
Dimensions | 20.78x38 mm |
Weight | 5.6 g |
Order now | |
Eddy Serials V1.0
Eddy- (V1.0) | S1/DSUB9 | S1/TTL | S1/Pin | S2/Pin |
|---|---|---|---|---|
RS232/422/485 | 1 x DSUB9 | 1 x TTL | 1 x Pin | 2 x Pin |
UART | 16C550 | 16C550 | 16C550 | 16C1054 |
FIFO (Byte) | 16 | 16 | 16 | 256 |
user I/Os | No | 9 | 4 | 4 |
Dimensions (mm) | 62.0 x 45.0 | 50.0 x 35.0 | 55.0 x 38.0 | 62.0 x 45.0 |
Weight | 32.3 g | 10g | 19 g | 21.9 g |
Power Input (DC) | 5V | 5V (3.3V on request) | 5V (3.3V on request) | 5V (3.3V on request) |
Order now | | | | |
Eddy Development Kit V1.0
The Eddy Development Kit V1.0 helps developers to integrate all Eddy V1.0 modules. With LED displays on Power, Ready, communication interface, GPIO, and serial line status, engineers can easily recognize the operation status of the module. Development environment including cross-compiler, simple code, documentation, and tools are included to accelerate integration and customization process.
Specifications | Baseboard |
|---|---|
Serial Port 1 | 1 x RS232 on DSUB9 Male |
Serial Port 2 | 1 x RS422/485 (5 Pin Terminal Block) |
user IOs | 4 Pins for Eddy-S1/TTL V1.0 and 16 Pins for Eddy-CPU V1.0 |
LEDs | Power, Ready, GPIO and Serial Tx/RX |
DIP Switch | selects serial interface (RS232, 422 or 485) and device type |
Reset Switch | only for Eddy-S1/TTL V1.0 |
Power Input | 5V or 3.3V, selectable by Power Select Jumper |
Dimensions | 110.0 mm x 80.0 mm |
Kit Package | 1xBaseboard, 1xEddy-CPU V1.0, 1xLan Cable, 1xSerial Cable, 1xUSB Cable, 1xBoard Support, 1xPower Adaptor, 1xPower Cable, 1xCD(Tools, Documentation, etc...) |
Order now | |
