SystemBase Eddy v2.5 series
Embedded CPU Modules built with Atmel AT91SAM9G20 eMPU (ARM926-based) for High-Speed Serial Communication with GNU/Linux kernel
SystemBase Eddy v2.5 modules are small GNU/Linux-ready embedded device servers with Atmel AT91SAM9G20 eMPU (ARM926-based) featuring RS232, RS422 and RS485 interfaces at up to 921.6 Kb/s, an extended temperature range (from -40 to +85 °C) and an Ethernet interface. Wireless interface extensions are also available.
Eddy-CPU is a high-performance embedded CPU module with a powerful ARM9 core processor. This compact-sized Eddy-CPU module provides complete embedded network connectivity, allowing developers and OEMs to design their own customized device that can be applied to almost all hardware environments. Eddy v2.5 is fully compatible with Eddy v2.1 Development Kit.
Features
- 32-bit Atmel AT91SAM9G20 eMPU 400 MHz / 8 MB data Flash / 32 MB SDRAM
- 10/100 Ethernet PHY (Auto MDIX) + 4 UARTs
- TWI (I2C), SPI, MCI, 4-channel ADC supported
- 2 USB Host, 1 USB Device supported
- Watchdog timer supported
- SNMP 1 / 2 / 3 supported
- Supported by Dev Kit including SDK, API
- Operated by Embedded GNU/Linux
- Supported by Eclipse based IDE (LemonIDE)
- Provides easy-to-use Windows utilities: COM Port Redirector, PortView, TestView
- Compact sized to fit into any hardware
- Operating Temperature : -40 to +85 °C
Available models
- Eddy-CPU v2.5
- Eddy-DK v2.5
- Eddy-S4M v2.5
- Eddy-S4M-DK v2.5
- Eddy-CPU mp v2.5
Eddy-CPU v2.5: Programmable Embedded CPU Modules
- Eddy-CPU v2.5
Eddy-CPU is a high-performance embedded CPU module with a powerful ARM9 core processor. This compact-sized Eddy-CPU module provides complete embedded network connectivity, allowing developers and OEMs to design their own customized device that can be applied to almost all hardware environments. Its features include a 19 bit address and a 16-bit data bus interface to connect an external device, a PHY interface for Ethernet connectivity and up to 56 programmable GPIO pins.
model | Eddy-CPU v2.5 |
|---|---|
Hardware | |
CPU | Atmel AT91SAM9G20 (400 MHz) |
Memory | 8 MB data Flash , 32 MB SDRAM |
External Interface | 19-bit / 16-bit data bus |
Ethernet Interface | 10/100 Base-T ( MAC PHY, AUTO MDI / MDIX) |
GPIO | up to 56 programmable I/O Pins |
Interface | ADC (4-channel 10-bit), SPI, TWI, USB 2.0 Full Speed, NAND Flash Attachable, 4 serial ports (max 921.6 kbps each) |
Power Input | 3.3 V (200 mA Max) |
Dimensions | 25 x 45.5 x 6 mm |
Weight | 10 g |
Network | |
Protocol | TCP, UDP, Telnet, ICMP, DHCP, TFTP, HTTP, SNMP 1/2/3, SSH, SSL |
Ethernet | 10/100 Mbps MAC / PHY |
Network Connection | Static IP, DHCP |
O/S | Embedded GNU/Linux |
Management | SNMP, Web, PortView |
Uploads | TFTP, FTP, Web |
Development Tools | LemonIDE & SDK |
Flash Burning | JTag, USB, Debug, Port |
Environmental | |
Operating Temp | -40 to +85 °C |
Storage Temp | -60 to +150 °C |
Humidity | 5 - 95% Non-Condensing |
Approvals | CE Class A, FCC Class A, RoHS Compliant |
Eddy-DK v2.5: Eddy Development Kit
- SystemBase Eddy-DK v2.5
The Eddy Development Kit (Eddy-DK) v2.5 helps developers to integrate Eddy v2.5/v2.1 modules. LED displays on Power, Ready, communication interface, GPIO, and serial line status enable engineers to easily recognize the module’s operation status. Development environment including cross-compiler, simple code, documentation, and tools are included to accelerate integration and customization process.
Spezifikation | Eddy-DK v2.5 |
|---|---|
NAND Flash | 256 MB, 8-bit I/F |
SD Card Connector | Push type, up to 2 GB/12.5 Mbps |
USB Connector | 1 x device; |
LCD Modul | 128 x 64 dots matrix structure |
Key | 4 x 4 matrix |
Battery holder | 3 V Lithium battery, 235 mAh |
LED | Power, Ready, 20 Programmable IO, Console & Serial TxD, RxD |
I2C Interface | 16-bit I2C BUS GPIO; |
SPI interface | 2-kbit EEPROM |
MCI Interface | SDCard, MMC Socket |
ADC Interface | Temp / light Sensor |
Digital I/O | 8-port Input, 8-port Output |
Switch | Serial or GPIO Select; |
Jumper Switch | Boot Mode Select, JTAG Select |
Serial Port | 2 x RS-232 DB9 Male; |
Console Port | DB9 Male |
LAN Port | 2 x RJ-45 |
ICE Port | Used for Flash programming |
Reset Button | Factory Default & warm boot |
Power Input | 9 - 48 V DC |
Dimensions | 240 x 180 mm |
Eddy-S4M v2.5 Programmable Embedded CPU Memory Module
- Eddy-S4M DK v2.5
Eddy-S4M is a high-performance embedded CPU module with a powerful ARM9 core processor. This compact-sized Eddy-S4M module provides complete embedded network connectivity, allowing developers and OEMs to design their own customized device that can be applied to almost any hardware environments. Its features include an interface to connect an external device, a PHY interface for Ethernet connectivity, and 34 programmable GPIO pins.
Specifications | Eddy-S4M v2.5 |
|---|---|
Hardware | |
CPU | Atmel AT91SAM9G20 (400 MHz) |
Ethernet Interface | 8 MB Data Flash, 32 MB SDRAM |
UARTs | 4-port, support up to 921.6 kbps |
USB 2.0 FS | 2 Host /1 Device port, 2.0 FS (12 Mbps) |
SD Card | MicroSD Support (Max 16 GB, SDHC) |
ADC | 0ne 4-channel 10-bit ADC |
TWI (2C) | Master, Multi-master and slave mode |
SPI | 8- to 16-bit Programmable Data Length, Four External Peripheral Chip Selects |
MCI | MMC spec v3.11 / SDIO spec v1.1 / SD Card Spec v1.0 Up to 2 GB, 12.5 Mbps |
GPIO | Max. 34 Programmable I/O Pins |
Power Input | 3.3 V (200 mA Max) |
Dimensions | 25 x 42 x 6 mm |
Weight | 7 g |
Network | |
Protocol | TCP, UDP, Telnet, ICMP, DHCP, TFTP, HTTP, SNMP 1&2, SSH, SSL |
Ethernet | 10/100 Mbps MAC / PHY |
Network Connetion | Static IP, DHCP |
Software | |
O/S | Embedded Linux |
Managment Tools | SNMP, Web, PortView |
Uploads | TFTP, FTP, Web |
Development Tools | LemonIDE & SDK |
Environmental | |
Operating Temp | -40 to +85°C |
Storage Temp | -60 to +150°C |
Humidity | 5 - 95% Non-Condensing |
Approvals | CE Class A, FCC Class A, ROHS Compliant |
Eddy-S4M DK v2.5: Eddy Development Kit
- Eddy-S4M DK v2.5 Development Kit
The Eddy-S4M DK v2.5 Development Kit helps developers to integrate Eddy-S4M v2.5 modules. LED displays on Power, Ready, communication interface, GPIO, and serial line status enable engineers to easily recognize the module’s operation status. Development environment including cross-compiler, simple code, documentation, and tools are included to accelerate integration and customization process.
Spezification | Eddy-S4M DK v2.5 |
|---|---|
Serial Port | 2 x RS-232 DB9 Male |
SD Card Connector | Push Type, Up to 16 GB |
ADC Interface | Light Sensor |
USB Connector | 1 x Device; |
LAN Port | 2 x RJ-45 |
DEBUG Port | DB9 Male |
Switch | Power ON/OFF |
LED | Power, Ready, 34 Programmable IO, |
JTAG Port | Used for downloading code and singlestepping |
Reset Button | Factory Default & Warm Boot |
JIG Sockel | two 2 x 23-pin socket, which connect JIG |
Expansion | 2 x 22-pin Header, used to test GPIO of |
Input Power | 5 VDC |
Dimensions | 160 x 120 mm |
Eddy-CPU/mp v2.5
- Eddy CPU MP v2.5
Eddy-CPU/mp is a high-performance embedded CPU module with a powerful ARM9 core processor (Atmel AT91SAM9G20). This compact-sized Eddy-CPU module provides complete embedded network connectivity, allowing developers and OEMs to design their own customized device that can be applied to almost all hardware environments. Its features include a 16 bit address and a 16-bit data bus interface to connect an external device, a PHY interface for Ethernet connectivity, and max 56 programmable GPIO pins.
Specifications | Eddy-CPU/mp v2.5 |
|---|---|
Hardware | |
CPU | Atmel AT91SAM9G20 (400 MHz) |
Memory | 8 MB DATA FLASH , 32 MB SDRAM |
External Interface | 16-bit address / 16-bit data bus |
Ethernet Interface | >10/100 Base-T (AUTO MDI / MDIX) |
GPIO | Max. 56 Programmable I/O pins |
Interface | ADC (4-channel 10-bit), SPI, TWI, USB 2.0 Full Speed, NAND Flash Attachable,Serial 4-ports (MAX 921.6 kbps) |
Power Input | 3.3 V (200 mA Max) |
Dimensions | 59.75 x 44.6 X 1.0 mm |
Weight | 8.3 g |
Network | |
Protocol | TCP, UDP, Telnet, ICMP, DHCP, TFTP, HTTP, SNMP 1,2 , SSH, SSL |
Ethernet | 10/100 Mbps MAC / PHY |
Network Connercton | Static IP, DHCP |
Software | |
O/S | Embedded Linux Kernel 2.6.21 |
Managment | SNMP, Web, PortView |
Uploads | TFTP, FTP, Web |
Development Tools | LemonIDE & SDK |
Flash Burning | USB, Debug, Port |
Environmental | |
Operating Temp | -40 to +85 °C |
Storage Temp | -60 to +150 °C |
Humidity | 5 - 95% Non-Condensing |
Approvals | CE |
