Trenz Electronic TE0720 Series (Z-7020)

TE0720 Module (angle view)
TE0720 Module
TE0720 Module L1IF
TE0720 L1IF (lower power consumption)


The Trenz Electronic TE0720 is a predominantly industrial-grade SoC module integrating a Xilinx Zynq Z020 SoC, a GBit Ethernet transceiver (physical layer), 8 GBit (1 GByte) DDR3 SDRAM with 32-bit width, 32 MByte Flash memory for configuration and operation, and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/O's is provided via rugged high-speed stacking strips. All modules in 4 x 5 cm form factor are fully mechanically and largely electrically compatible among them.

All this on a tiny footprint, smaller than a credit card, at the most competitive price.

Key Features

  • Xilinx Zynq SoC micromodule
  • Supported by the free Xilinx Vivado WebPACK tool.
  • Rugged for high shock and vibration
  • ARM dual-core Cortex-A9 MPCore
  • 10/100/1000 tri-speed Gigabit Ethernet transceiver (PHY), SGMII accessible on a board-to-board connector
  • USB 2.0 high speed ULPI transceiver
  • 32-bit-wide 1 GByte DDR3 SDRAM
  • 32 MByte SPI Flash memory (for configuration and operation)
  • 4 GByte e-NAND (up to 32 GByte)
  • Plug-on module with 2 × 100-pin and 1 x 60-pin high-speed hermaphroditic strips
  • 152 FPGA I/O's (75 LVDS pairs possible) and 14 MIO's available on board-to-board connectors
  • 4.0 A x 1.0 V power rail
  • 1.5 A x 1.5 V power rail
  • 1.5 A x 1.8 V power rail
  • System management and power sequencing
  • eFUSE bit-stream encryption
  • AES bit-stream encryption
  • Valid MAC Address and 2K serial EEPROM
  • SHA-256 authentication chip with unique serial number
  • RTC, temperature compensated
  • 3 user LED
  • Industrial and commercial temperature range available
  • Evenly-spread supply pins for good signal integrity

Assembly options for cost or performance optimization plus high volume prices available on request.

Embedded Development Suite

A hardware development platform is available.

Latest documentation, design support files and reference designs with source files are available for download free of charge.

Model Overview

TE0720 category in the webshop




Temp. range




1 GByte DDR


Online Shop Trenz Electronic GmbH

TE0720-03-2IFC3 *1)


1 GByte DDR


TE0720-02-L1IF *2)


512 MByte




1 GByte DDR


Online Shop Trenz Electronic GmbH



256 MByte DDR


Online Shop Trenz Electronic GmbH



1 GByte DDR


Online Shop Trenz Electronic GmbH

Heatsink (1st version)

especially for
TE0720 boards


Heatsink (2nd version)

especially for
TE0720 boards

*1) Low profile - this module is identical to the TE0720-02-2IF, except here are 2.5 mm Samtec connectors installed instead of 4 mm.

*2) Low power - this module is almost identical (512 DDR3L Mbyte instead of 1 GByte DDR SDRAM) to the TE0720-02-2IF, except here is a Xilinx Zynq 7020 SoC XC7Z020-L1CLG484I installed, which has a lower power consumption.


Please visit our download area for more information plus free and open reference designs.


Trenz Electronic launches UltraSoM+ system-on-module based on the ground-breaking Xilinx Zynq UltraScale+ MPSoC

Targets complex multi-tasking embedded system designs in automotive, broadcast, communications,...

Limited special offer: LabVIEW Physical Computing Kit & Pmod Bundle

Trenz Electronic GmbH offers a special bundle for a limited time! The whole bundle consists of...

New distributor for Trenz Electronic items in Japan

Trenz Electronic would like to give a warm welcome to our new distributor of our products in...

Trenz business partner "Sundance" adds low-cost Artix-7 FPGA to PC/104

EMC2-7A is a stackable FPGA solution compatible with PCIe/104 OneBank™ PCI-Express interface and...

Digilent is rebranding and repackaging the whole Pmod line

We are sure, everybody heard about the Pmods - they are a strong growing product segment