Firmware SC0911-REV05 for TEB0911-REV02,REV03, REV04 
-Created with Lattice Diamond 3.10_x64
-File: SC0911_REV05.jed
Wiki:
  https://wiki.trenz-electronic.de/display/PD/SC-CPLD-Firmware
  https://wiki.trenz-electronic.de/display/PD/SC0911+CPLD

Programming
1. Connect MiniUSB cable to J35 XMOD (CPLD label)
2. Check that DIP Switch S3-2 is in ON position
3. Power ON the board
4. Run "Lattice Diamond Programmer"
5. Select "Create new project from JTAG chain" and press "OK"
7. Select "LCMX02-7000HC" as "Device" .
8. Click to "File Name" and then to "...". Select "SC0911_REV05.jed" file.
10. Run "Design"->"Program" from main menu
11. Wait operations to complete