New product release: TE0716 - SoM mit Xilinx Zynq-7000 SoC XC7Z020

The Trenz Electronic TE0716 is a commercial-grade* SoM (System on Module) based on Xilinx Zynq-7000 SoC XC7Z020*, with 1 GByte of DDR3L-1600 SDRAM*, 32 MByte of SPI Flash memory, 10 x 12-Bit Low Power SAR ADCs, 512 Kb serial EEPROM, Gigabit Ethernet PHY transceiver, an USB PHY transceiver, a single chip USB2.0 to UART/JTAG interface (Xilinx license included), and powerful switching-mode power supplies for all on-board voltages. A large number of configurable I/Os are provided via rugged high-speed board-to-board connectors.

Further Details and ordering:
TE0716 - SoM with Xilinx Zynq-7000 SoC

Other assembly options for cost or performance optimization plus high volume prices available on request.

Key Features

  • SoC/FPGA
    • Package: CLG484
    • Device: Xilinx Z-7020
    • Speed: -1 *
    • Temperature: C grade *.
  • RAM/Storage
    • Low Power DDR3 SDRAM on PS
      • Data width: 32bit
      • Size: def. 1GB *
      • Speed: 1600 Mbps **
    • QSPI boot Flash
      • Data width: 4bit
      • Size: 32MB *
    • MAC address serial EEPROM with EUI-48™ node identity
    • 512Kb user MAC address serial EEPROM.
  • On Board
    • 10x 12-Bit Low Power SAR ADCs up to 2 MSPS
    • Low Power Oscillators.
    • Gigabit Ethernet PHY transceiver
    • High-Speed USB 2.0 ULPI transceiver with full OTG support
    • Single chip High-Speed USB 2.0 to UART/JTAG Interface (Xilinx License included) (FTDI FT2232H).
    • 2 x User RGB LEDs (Green), LED FPGA "Done" (Green).
    • 2 x Tactile Switches (User), 1 x Tactile Switche (Reset).
  • Interface
    • 120 x HR PL I/Os (3 banks).
    • 2 x PS MIOs (shared with UART TX/RX ZYNQ-FTDI).
    • 1 Gbps RGMII Ethernet interface.
    • High Speed USB 2.0 ULPI with full OTG support.
    • High Speed USB 2.0 to UART/JTAG interface, including microUSB-B connector.
    • microSD
    • JTAG
  • Power
    • On-board high-efficiency DC-DC converters for all voltages used.
  • Dimension
    • 45 x 65 mm

Notes

* depends on assembly version
** depends on used Zynq and DDR3 combination

 

Latest documentation, design support files and reference designs with source files are available for download free of charge.

All modules produced by Trenz Electronic are developed and manufactured in Germany.

The fields marked with * are required.