Skip to main content Skip to search Skip to main navigation

Pmod 8LD: Eight High-brightness LEDs

Product information "Pmod 8LD: Eight High-brightness LEDs"

Flexible peripheral modules for all your designs

Pmod™ devices are Digilent’s line of small I/O interface boards that offer an ideal way to extend the capabilities of programmable logic and embedded control boards. They allow sensitive signal conditioning circuits and high-power drive circuits to be placed where they are most effective - near sensors and actuators.

Pmod modules communicate with system boards using 6, 8, or 12-pin connectors that can carry multiple digital control signals, including SPI and other serial protocols. Pmod modules allow for more effective designs by routing analog signals and power supplies only where they are needed, and away from digital controller boards.

Overview Pmod 8LD

The Pmod 8LD has eight high-bright LEDs that are driven by logic-level transistors so each LED can be illuminated with a logic high signal that provides less than 1mA of current.

Features

  • Eight high-brightness green LEDs
  • Uses BJTs for low-power logic level control
  • Small PCB size for flexible designs 1.1 in × 0.8 in (2.8 cm × 2.0 cm)
  • 2×6-pin Pmod connector with GPIO interface

Scope of Delivery

  • 1 x Pmod 8LD

Pmod Hardware Compatibility Guide

Digilent's guide about determining hardware compatibility.

References

  • Manufacturer: Digilent Inc.
  • Manufacturer's article name: Pmod 8LD: Eight High-brightness LEDs
  • Manufacturer's article number: 410-163

Resources

Other Digilent products are available on request.
Skip product gallery

Accessories

2x 6 pin (12 pin) Header & Gender Changer (5-pack)
Acts as a female-to-male gender changer for a 2x6 pin female header or cable and can connect any two Digilent 2x6 pin cables together, ships in pack of 5
Article number: 23620
Stock: 14

Regular price: US$3.56
6 pin Header & Gender Changer (5-pack)
Changes gender for any 6 pin female header, female to male, connects any 2 digilent 6 pin cables together, ships in pack of 5
Article number: 23621
Stock: 0

Regular price: US$1.77
2 x 6 Pin Cable, 6" - 18cm length (12 pin cable)
Designed to connect a 12-pin Pmod to a 12-pin system board connector.
Article number: 24450
Stock: 52

Regular price: US$4.76
2 x 6-pin to Dual 6-pin Pmod Splitter Cable, 15 cm in length
Designed for use with Digilent Peripheral Modules that have 2x6 pin connectors. Connects two 6-pin system board connectors to a 12-pin Pmod connector, or vice versa.
Article number: 24451
Stock: 5

Regular price: US$4.76