Header image for the "Expansion & Peripherals" category featuring several expansion and peripheral boards from Trenz Electronic on a dark blue background, including adapter boards, interface modules, and expansion boards.

Selection of expansion and peripheral boards from Trenz Electronic on a dark blue background.

Image notice: AI-manipulated

Expansion & Peripherals

Expansion boards, interface modules and peripherals for flexible extension of FPGA, SoC and embedded systems.

CRUVI AP Memory x8/x16 Xccela PSRAM Board

AP memory board compatible with CRUVI HS slots supporting 1.8V VCCIO, size: 1.8 x 1.9 cm

Article number: CR00045-01-0

Stock: 113

US$13.09

Details

CRUVI Motor Driver Module

Mezzanine card, supports motors with up to 4 phases up to 40V.

Article number: CR00140-02

Stock: 0

US$278.46

Details

CRUVI-GT Ethernet Adapter with Intel® I210

Ethernet adapter for CRUVI boards

Article number: CR00205-01-A

Stock: 52

US$70.21

Details

CRUVI-HS 15-pin CSI-2 Camera Adapter

CRUVI adapter between Samtec ST4 connector and ZIF FFC (Flat Flex Cable) CSI-2 Camera connector

Article number: CR00300-01

Stock: 8

US$13.09

Details

CRUVI-HS Breakout Adapter

Signal breakout debug adapter for test purposes

Article number: CR00026-01-A

Stock: 2

US$34.51

Details

CRUVI-HS Breakout Adapter

Signal breakout debug adapter for test purposes, pin headers enclosed

Article number: CR00026-01-NC

Stock: 31

US$34.51

Details

CRUVI-HS Dual Ethernet Adapter with PHY

Dual Ethernet adapter for CRUVI modules, compatible with the CR00103

Article number: CR00202-01

Stock: 20

US$63.07

Details

CRUVI-HS e.MMC Extension

Compatible with CRUVI HS slots supporting 1.8V or 3.3V VCCIO, e.MMC: 8 GB 1.8V / 3.3V e.MMC (SDINBDG4-8G-XI2) size: 1.8 x 2.4 cm

Article number: CR00049-01-A08I

Stock: 117

US$20.23

Details

CRUVI-HS Ethernet Adapter with PHY

Ethernet adapter for CRUVI modules, compatible with the CR00103

Article number: CR00200-01

Stock: 4

US$41.65

Details

CRUVI-HS HDMI and 15-pin CSI-2 Camera Adapter

CRUVI Adapter for HDMI with high-speed level shifter PTN3365

Article number: CR00240-02-A

Stock: 12

US$55.93

Details

CRUVI-HS Loopback Adapter

Loopback adapter for test purposes

Article number: CR00091-01

Stock: 12

US$13.09

Details

Cruvi-HS MIPI dual CSI-2 / DSI-2 22-pin Connector

The Trenz Electronic CR00301-01-A is a CRUVI Adapter with Samtec Ultra-Fine connector and 2x CSI-2 Camera connector. For further informations please visit www.cruvi.com. Key Features On Board 2-Channel I2C Multiplexer I2C dual 2kbit Serial EEPROM Interface 2x CSI-2 22pin Camera Connector MIPI CSI-2 (4x DATA + CLOCK) I2C CRUVI HS connector (Samtec Ultra-Fine Pitch Header 60 pins) GPIO: CSI0, CSI1 I2C (SMB) Power 5V via CRUVI connector 3.3V via CRUVI connector Dimension 26 mm x 22 mm Other assembly options for cost or performance optimization plus high volume prices available on request. Scope of Delivery 1 x CR00301-01-A Trenz Electronic CRUVI-HS 22-pin CSI-2 Camera Adapter Additional Information Manufacturer's article number: CR00301-01-A Trenz Electronic CR00300 Wiki Support Forum All modules produced by Trenz Electronic are developed and manufactured in Germany.

Article number: CR00301-01-A

Stock: 94

US$19.04

Details

CRUVI-LS to Pmod Adapter

Simple passive adapter from CRUVI Low Speed to a Digilent Pmod interface.

Article number: CR00005-01-1

Stock: 6

From US$7.85

Details

Dormouse White Rabbit FMC card with SFP+ 10 GigE, IEEE 1588-2019 PTP V2.1

Dormouse White Rabbit FPGA Mezzanine Card (FMC) provides tunable oscillators that are required to implement and operate a White Rabbit implementation.

Article number: 34263

Stock: 0

US$11,721.50

Details

Ettus BasicRX for USRP N210: Daughterboard

The BasicRX daughterboard is a low-cost daughterboard that provides direct access to the ADC inputs.

Article number: 33055

Stock: 0

US$223.35

Details

Ettus BasicTX for USRP N210: Daughterboard

The BasicTX daughterboard is a low-cost daughter board that provides transmission capability from the USRP from 1 to 250 MHz.

Article number: 33054

Stock: 0

US$223.35

Details

Ettus LFRX for USRP N210: Daughterboard

The LFRX daughterboard is a low-cost daughterboard that provides direct access to the ADC inputs.

Article number: 33053

Stock: 0

US$223.35

Details

Ettus LFTX for USRP N210: Daughterboard

The LFTX daughterboard utilizes two high-speed operational amplifiers to allow transmission from 0-30 MHz.

Article number: 33052

Stock: 0

US$223.35

Details

Ettus SBX for USRP N210: Daughterboard

The SBX is a wide bandwidth transceiver that provides up to 100 mW of output power, and a typical noise figure of 5 dB.

Article number: 33058

Stock: 0

US$943.78

Details

Ettus UBX-40 for USRP N210: Daughterboard

The UBX 40 daughterboard is a full-duplex wideband transceiver that covers frequencies from 10 MHz to 6 GHz with 40 MHz of instantaneous bandwidth.

Article number: 33051

Stock: 0

US$2,579.17

Details

FMC Card with four SFP+ 10 Gbit ports

For use on an FMC HPC carrier and not suitable for stand-alone operation.

Article number: TEF0008-03-D

Stock: 0

From US$156.37

Details

FMC Pcam Adapter

The FMC Pcam (CSI-2 interface) Adapter is a cost-effective way to add cameras to your FPGA or APSoC development board with the high speed, FMC connector.

Article number: 29768

Stock: 0

US$279.19

Details