Skip to main content Skip to search Skip to main navigation

FMC Card with four SFP+ 10 Gbit ports

Product information "FMC Card with four SFP+ 10 Gbit ports"

The predecessor of this article is TEF0008-02-D. All changes are in the Product Change Notification (PCN).

The Trenz Electronic TEF0008 is a FPGA to Mezzanine Card (FMC) based on VITA 57.1 FMC HPC Standard, with four SFP+ 10 Gbit ports for fiber optical SFP modules. It is inteded for use on a FMC HPC carrier and can not be used stand-alone.

The front panel is only offered as an additional accessory (Trenz article Nr. 34034).

Mounting holes near the front pannel are not implemented due to physical restrictions caused by the SFP cage. The dimensions exceed in some area the by Vita 57.1 standard defined dimensions. In the middle region of the card the cage is higher than the specified max high for this area. Check carefully if the carrier card uses this space for other components conflicting mechanical. The bottom side is at the high limit.

All parts are at least industrial temperature range of -40°C to +85°C. The module operating temperature range depends on customer design and cooling solution. Please contact us for options.

Key Features

  • Four SFP+ 10 Gbit ports
  • HPC FMC connector
  • Low jitter programmable clock generator
  • Altera® MAX® 10 FPGA 10M08SAU169I7G
  • 3.3 V to 1.8 V DC/DC converter
  • 32 Kbit EEPROM
  • Status LED (green)
  • Dimension: 69 x 84 mm, SFP+ connector excluded (+ 5.5 mm)
  • Highest part on PCB top is 9.5 mm (SFP+ cage, excluded front plate), bottom 1.4 mm (MAX10 FPGA)

Other assembly options for cost or performance optimization plus high volume prices available on request.

Scope of Delivery

  • 1 x TEF0008-03-D Trenz Electronic FMC card

Additional Information

All modules produced by Trenz Electronic are developed and manufactured in Germany.

Downloads

Digilent
OHO-Elektronik
Sundance
Trenz_Electronic - Documents and Design files for Trenz Electronic Products