Open Hardware

"ArduZynq" Arduino compatible SoC-Module with AMD Zynq™ 7010-1C, 512 MByte DDR3L

AMD Zynq™ SoC XC7Z010-1CLG225C, Arduino compatible, 512 MByte DDR3L, 16 MByte Flash, USB OTG, on-board USB JTAG and UART

Article number: TE0723-04-41C68-A

Stock: 85

US$140.42

Details

DIPFORTy1 "Soft Propeller" with AMD Zynq™ 7010-1I, 16 MByte Flash

AMD Zynq™ XC7Z010-1CLG225I, DIP40 form factor, 16 MByte SPI Flash, size: 1.8 x 5.1 cm, industrial temperature range

Article number: TE0722-04-41I-4-A

Stock: 0

US$70.21

Details

IceZero with Lattice ICE40HX, 4 Mbit external SRAM, 3.05 x 6.5 cm

Low cost general purpose Lattice FPGA platform for the RaspberryPi

Article number: TE0876-03-A

Stock: 0

From US$35.08

Details

icoBoard Version 1.1 with 8 Mbit SRAM

Lattice FPGA with 8k LUT, 100 MHz max. clock, 8 Mbit of SRAM and programmable in Verilog by a complete open source FPGA toolchain

Article number: TE0887-04-M

Stock: 52

US$46.41

Details

icoUSBaseboard: FTDI Interfacebasis for icoBoard

USB FTDI Interface Board for icoBoard

Article number: TE0889-03

Stock: 0

US$46.41

Details

S7 Mini - Fully Open-Source Module with AMD Spartan™ 7S25-1C, 64 Mbit HyperRAM

Fully Open-Source Spartan™ 7 Module, 64 MBit Config PROM for dual-boot and/or SW code storage, 64 MBit HyperRAM DRAM, 5V supply input

Article number: TE0890-02-P1C-5-A

Stock: 3

From US$35.08

Details

XMOD FTDI JTAG Adapter - AMD compatible

Universal USB adapter with 2 channels based on FTDI FT2232H USB2 HS interface chip.

Article number: TE0790-03

Stock: 0

US$58.31

Details

XMOD FTDI JTAG Adapter - not compatible with AMD Tools

Universal USB adapter with two channels based on FTDI FT2232H USB2 HS Interface chip and NOT compatible with AMD Tools.

Article number: TE0790-03L

Stock: 136

US$34.51

Details

XMOD JTAG Connector

Accessory for the XMOD JTAG Adapter

Article number: TE0791-01

Stock: 30

US$16.66

Details

Filter products