"ArduZynq" Arduino compatible SoC-Module with AMD Zynq™ 7010-1C, 512 MByte DDR3L

US$138.20

Ready to ship today, Delivery time appr. 1-3 workdays

Article number: TE0723-04-41C68-A

Standard leadtime (weeks): 25

Article status: Full production

Stock: 102

Product information ""ArduZynq" Arduino compatible SoC-Module with AMD Zynq™ 7010-1C, 512 MByte DDR3L"

This product is offered at a discount and is valid while stocks last!
______________________________________________________________

The predecessor of this article is TE0723-03-41C64-A. All changes are in the Product Change Notification (PCN).

The Trenz Electronic TE0723-04-41C68-A is an Arduino shield compatible SoC module integrating a AMD Zynq™ 7010, 512 MByte DDR3L, and 16 MByte QSPI Flash Memory for configuration and operation.

The "ArduZynq" is the lowest cost, Linux ready solution to use the latest FPGA: the AMD/Xilinx Zynq™ 7 series. Use it as a FPGA development platform, or run Linux on the Cortex A9 cores.

All parts are at least commercial temperature range of 0°C to +70°C. The module operating temperature range depends on customer design and cooling solution. Please contact us for options.

Notice

Do not access the FT2232H EEPROM using FTDI programming tools, doing so will erase normally invisible user EEPROM content and invalidate stored AMD/Xilinx JTAG license. Without this license the on-board JTAG will not be accessible any more with any AMD/Xilinx tools. Software tools from FTDI website do not warn or ask for confirmation before erasing user EEPROM content.

Key Features

SoC / FPGA
- Device: AMD Zynq™ XC7Z010-1CLG225C
- Speedgrade: -1
- Temperature range: Commercial
- Package: CLG225

RAM / Storage
- 512 MByte DDR3L SDRAM
- 16 MByte QSPI Flash
- Micro SD card socket

IO Resources
- 7 ADC multiplexed inputs (shared with IO)
- 31 PL IO (shared with ADC)
- 4 MIO

On Board Periphery
- USB 2.0 PHY, OTG micro USB Type A/B connector
- FTDI USB/JTAG/UART bridge
- 52 MHz Clock source (PS)
- Supported extensions:
  - Arduino UNO shield
  - Single PMOD
- 2 User LEDs
- Power LED
- Reset push button

Power
- Single 5V power input via USB or pin-header
- 3.3V and 5V output

Dimension
- Arduino UNO form factor
- 50.8 mm x 53.34 mm

Other assembly options for cost or performance optimization plus high volume prices available on request.

Recommended Software

Vivado Standard Edition (free version)

The Vivado Standard Edition is the FREE version of the Vivado design suite. Vivado Standard delivers instant access to some basic Vivado features and functionality at no cost.

Overview Vivado Standard and Enterprise Edition

Development Support

Latest documentation, design support files and reference designs with source files are available for download free of charge.

Scope of Delivery

1 x TE0723-04-41C68-A "ArduZynq" Trenz Electronic module with AMD Zynq™ 7010

Additional Information

Manufacturer's article number: TE0723-04-41C68-A
Trenz Electronic TE0723 Wiki
Hackaday Project "Arduino Compatible Zynq™ Shield"
Support Forum

All modules produced by Trenz Electronic are developed and manufactured in Germany.

The online pictures of this product are not a legally binding offer, but are symbol pictures for illustration and presentation only.

Downloads

Digilent
OHO-Elektronik
Sundance
Trenz_Electronic - Documents and Design files for Trenz Electronic Products

File	File-Extension	Description
Bit-File	*.bit	FPGA Configuration File
Diverse Reports	--	Report files in different formats

File	File-Extension	Description
MCS-File	*.mcs	Flash Configuration File with Boot-Image (MicroBlaze or FPGA part only)
Bit-File	*.bit	FPGA Configuration File
Software-Application-File	*.elf	Software Application for Zynq or MicroBlaze Processor Systems
Hardware-Platform-Specification-Files	*.hdf	Hardware Specification from the vivado project. Used in SDK/HSI
MMI-File	*.mmi	File with BRAM-Location to generate MCS or BIT-File with *.elf content (MicroBlaze only)
Diverse Reports	--	Report files in different formats

Component	Description
Xilinx-IP	I2C,SPI-Flash,UART
TE-IP	ASIO (AXI-Stream to IO)

File	File-Extension	Description
MCS-File	*.mcs	Flash Configuration File with Boot-Image (MicroBlaze or FPGA part only)
BIT-File	*.bit	FPGA Configuration File
Software-Application-File	*.elf	Software Application for Zynq or MicroBlaze Processor Systems
Hardware-Platform-Specification-Files	*.hdf	Exported Vivado Hardware Specification for SDK/HSI
MMI-File	*.mmi	File with BRAM-Location to generate MCS or BIT-File with *.elf content (MicroBlaze only)
Diverse Reports	--	Report files in different formats

Component	Description
Xilinx-IP	VIO
TE-IP	Startupe2,LabTools Frequency Counter

Component	Description
Xilinx-IP	VIO (Virtual Input/Output)
TE-IP	Labtools Frequency Counter, Startupe2 Primitive Wrapper

Directory		Content
PCN		Product change notifications: Important changes between hardware revisions
Reference Design		Reference Designs sort by ISE/EDK Version
REV0x		Documents and source files sorted by PCB revision. Connector Pinout Viewer/XDC-Generator available on TE Master Pinout, as well as a additional informations on All Trenz Electronic SoMs
	Documents	PDF documents, like Technical Reference Manual, Schematics, Assembly Diagrams and...
	Firmware	Initial configuration for diverse PCB components, like CPLD, PLL and ...
	HW Design	Relevant files for PCB-Design, like PCB-STEP-Model, Cooler-STEP-Model, Trace-length, Altium libraries / projects (only for selected carrier boards), and ...
	Pictures	PCB-Pictures

Directory		Content
PCN		Product change notifications: Important changes between hardware revisions
REV0x		Documents and source files sorted by PCB revision. Connector Pinout Viewer/XDC-Generator available on TE Master Pinout, as well as a additional informations on All Trenz Electronic SoMs
	Documents	PDF documents, like Technical Reference Manual, Schematics, Assembly Diagrams and...
	Firmware	Initial configuration for diverse PCB components, like CPLD, PLL and ...
	HW Design	Relevant files for PCB-Design, like PCB-STEP-Model, Cooler-STEP-Model, Trace-length, Altium libraries / projects (only for selected carrier boards), and ...
	Pictures	PCB-Pictures

Component	Description
Xilinx-IP	MicroBlaze, MB-Debug, Uartlite, MIG7 for DDR3, QSPI, Timer, Ethernet Lite
TE-IP	ASIO GPIO (AXI-Stream to GPIO)

"ArduZynq" Arduino compatible SoC-Module with AMD Zynq™ 7010-1C, 512 MByte DDR3L

Product information ""ArduZynq" Arduino compatible SoC-Module with AMD Zynq™ 7010-1C, 512 MByte DDR3L"

Notice

Key Features

Recommended Software

Development Support

Scope of Delivery

Additional Information

Downloads

TEC0850 Basic Design

CR00100 Basic Example

CR00100 Basic Example

CR00103 Hyperram Citrobits

CR00103 Certus Test

CR00107 Basic Hello World Example

TE0802 Basic Linux Example

TE0802 Basic Linux Example

TE0802 Basic Linux Example

TE0802 Basic Linux Example

TE0950 Vitis AI Reference Design

TE0950 Basic Linux Example

TE0950 Basic Linux Example

TEI0022 Basic Example

TEI0022 Basic Example

TE0717 Hello World Example

TEI0001 Basic Example

TEI0001 Basic Example

TEI0001 Basic Example

TEI0001 Basic Example

TEI0001 Basic Example

TEI0001 Basic Example

TEI0003 LED Sequencer Example

TEI0003 NIOS SDRAM Example

TEI0003 Basic Example

TEI0003 Basic Example

TEI0003 Basic Example

TEI0003 Basic Example

TEI0003 Basic Example

TEI0010 Basic Example

TEI0010 Basic Example

TEI0010 Basic Example

TEI0010 Basic Example

TEM0001 Test Board Example

TEI0050 Basic Example

TEI0050 Basic Example

TEI0050 Basic Example

TEI0015 DAQ Capture Demo

TEI0015 Data Capture Demo

TEI0015 Jupyter Demo

TEI0016 DAQ Capture Demo

TEI0016 Data Capture Demo

TEI0016 Jupyter Demo

TEI0023 DAQ Capture Demo

TEI0023 Data Capture Demo

TEI0023 Jupyter Demo

TE0890 Hello World Example

TE0890 Hello World Example

ZynqberryZero Demo VIDEO/AUDIO Design with RPI video camera stream to monitor

Basic Linux Example

ZynqberryZero Demo VIDEO/AUDIO Design with RPI video camera stream to monitor

ZynqberryZero Demo VIDEO/AUDIO Design with RPI video camera stream to monitor

TEM0005 Webserver Demo1

MicroBlaze Basic-System

TE0725 HyperRAM Example

TE0725 Basic Example

TE0725 HyperRAM Example

TE0725 Basic Example

TE0725 HyperRAM Example

TE0725 Basic Example

TE0725 HyperRAM Example

TE0725 Basic Example

TE0725 Basic Example

TE0725LP Frequency Measurement

TE0725LP Basic Example

TE0725LP Basic Example

TE0725LP Basic Example

TE0725LP Basic Example

TE0725LP Basic Example

TE0714 VIO LED Design

TE0714 Basic Barmetal Example