TE0820-05-4DE81MAS Starter Kit

US$861.56

Possible to order, delivery time on request.

Article number: TE0820-05-4DE81MAS

Article status: Upgrade available

Stock: 0

Product information "TE0820-05-4DE81MAS Starter Kit"

The successor of this article is TE0820-05-4DE51QAS. All changes are in the Product Change Notification (PCN).

The Trenz Electronic Starter Kit TE0820-05-4DE81MAS includes a TE0820-05-4DE81MA SoC module on a TE0703-07 carrier board with a heatsink. Supplied with a 5V power supply, two VG96 connectors (DIN 41612), a 32 GB microSD card and a USB cable.

The Module: TE0820-05-4DE81MA

The Trenz Electronic TE0820-05-4DE81MA is an industrial-grade MPSoC module integrating a AMD Zynq™ UltraScale+™ ZU4EV, 2 GByte DDR4 SDRAM, 128 MByte Flash memory for configuration and operation, and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/O's is provided via rugged high-speed stacking connections.

Key Features

FPGA
- Device: AMD Zynq™ UltraScale+™ XCZU4EV-1SFVC784E
- Speedgrade: -1
- Temperature range: Extended
- Package: SFVC784
- Graphic Processing Unit (GPU) + Video codec unit (VCU)

RAM/Storage
- 2 GByte DDR4 SDRAM
- 128 MByte QSPI Boot Flash in dual parallel mode
- 8 GByte e.MMC Memory
- MAC address serial EEPROM with EUI-48 Node Identity

On Board
- Lattice MachXO2 CPLD
- Programmable quad PLL clock generator PLL for PS GTR clocks
- Hi-speed USB2 ULPI Transceiver
- 4 x LEDs

Interface
- Plug-on module with 2 x 100-pin and 1 x 60-pin Razor Beam High-Speed hermaphroditic Terminal/Socket Strips (regular 4 mm)
- Gigabit Ethernet transceiver PHY
- Hi-speed USB2 ULPI transceiver with full OTG support
- Graphic Processor Mali-400 MP2
- 132 x HP PL I/Os (3 banks)
- 14 x PS MIOs (6 of the MIOs intended for SD card interface in default configuration)
- 4 x serial PS GTR transceivers
- Four high-speed serial I/O (HSSIO) interfaces supporting following protocols:
  - PCI Express interface
  - SATA 3.1 interface
  - DisplayPort interface with video resolution up to 4k x 2k
  - USB 3.0 specification compliant interface implementing a 5 Gbit/s line rate
  - 1 GB/s serial GMII interface

Power
- All power supplies on board

Dimension
- 4 x 5 cm

Other assembly options for cost or performance optimization plus high volume prices available on request.

Recommended Software

Vivado Standard Edition (free version)

The Vivado Standard Edition is the FREE version of the Vivado design suite. Vivado Standard delivers instant access to some basic Vivado features and functionality at no cost.

Overview Vivado Standard and Enterprise Edition

The Baseboard: TE0703-07

The Trenz Electronic TE0703 carrier board is a baseboard for 4 x 5 SoMs, which exposes the MIO- and the PS/PL-pins of the SoM to accessible connectors and provides a whole range of on-board-components to test and evaluate Trenz Electronic 4 x 5 SoMs.

Key Features

On Board
- USB JTAG and UART interface (FTDI FT2232H), compatible with AMD-tools (also with many other tools)
- SDIO port expander with voltage-level translation
- 4 x User LEDs
  - D1 and D2 are connected to the carrier controller, their function depends on the firmware
  - D3 and D4 are connected to the 4 x 5 module B2B connector pins, and are directly controlled by the module
- 1 x User push button
  - Connected to "intelligent Carrier Controller (iCC)" and can be used as module reset button. Other usage possible, actual function depend on the code loaded into iCC
- 6 A high efficiency power SoC DC-DC step-down converter with integrated inductor for 3.3 V power supply
- 4 User DIP switches
  - Enable/disable update of the "intelligent Carrier Controller"
  - MIO0 (readable signal by iCC and module)
  - 2 "mode" bits

Interface
- Trenz 4 x 5 module socket (3 x Samtec LSHM series connectors)
- Micro SD card connector - Zynq SDIO0 bootable SD port
- 2 x VG96 backplane connectors (mounting holes and solder pads)
- Mini USB connector (USB JTAG and UART interface)
- RJ45 GbE connector
- USB-Host connector

Power
- Barrel jack for 5V power supply input
Size
- 6.45 x 10 cm

Scope of Delivery TE0820-05-4DE81MAS Starter Kit

1 x TE0820-05-4DE81MA MPSoC Module with AMD Zynq™ UltraScale+™ ZU4EV-1E
1 x TE0703-07 carrier board for Trenz Electronic modules with 4 x 5 cm form factor
1 x Pre-installed heatsink for TE0820, spring-loaded
2 x VG96 connectors (DIN 41612)
1 x Power supply 5V with 4000 mA current including four adapter (US, UK, EU, AUS)
1 x 32 GB Class 4 microSDHC card incl. adapter
1 x USB cable, Typ A to Typ B mini, 2 meter length

Additional Information

Manufacturer's article number: TE0820-05-4DE81MAS
Trenz Electronic Wiki TE0820 Starter Kit
Support Forum

All modules produced by Trenz Electronic are developed and manufactured in Germany.

Properties "TE0820-05-4DE81MAS Starter Kit"

Properties

FPGA Manufacturer:	AMD
FPGA/SoC Architecture:	UltraScale+
FPGA/SoC Family:	Zynq
FPGA/SoC Type:	MPSoC
Form Factor:	4 × 5 cm

Data according to manufacturer. Errors and changes reserved.

Downloads

File	File-Extension	Description
Bit-File	*.bit	FPGA Configuration File
Diverse Reports	--	Report files in different formats

Component	Description
IP-Interfaces	I2C, ASIO (AXI-Stream to IO), SPI-Flash, Uart

Application	Description
hello_world	Xilinx Hello World Example

File	File-Extension	Description
MCS-File	*.mcs	Flash Configuration File with Boot-Image (MicroBlaze or FPGA part only)
Bit-File	*.bit	FPGA Configuration File
Software-Application-File	*.elf	Software Application for Zynq or MicroBlaze Processor Systems
Hardware-Platform-Specification-Files	*.hdf	Hardware Specification from the vivado project. Used in SDK/HSI
MMI-File	*.mmi	File with BRAM-Location to generate MCS or BIT-File with *.elf content (MicroBlaze only)
Diverse Reports	--	Report files in different formats

Component	Description
Xilinx-IP	I2C,SPI-Flash,UART
TE-IP	ASIO (AXI-Stream to IO)

Application	Description
hello_world	Xilinx Hello World Example

File	File-Extension	Description
MCS-File	*.mcs	Flash Configuration File with Boot-Image (MicroBlaze or FPGA part only)
BIT-File	*.bit	FPGA Configuration File
Software-Application-File	*.elf	Software Application for Zynq or MicroBlaze Processor Systems
Hardware-Platform-Specification-Files	*.hdf	Exported Vivado Hardware Specification for SDK/HSI
MMI-File	*.mmi	File with BRAM-Location to generate MCS or BIT-File with *.elf content (MicroBlaze only)
Diverse Reports	--	Report files in different formats

Component	Description
Xilinx-IP	VIO
TE-IP	Startupe2,LabTools Frequency Counter

File	File-Extension	Description
BIT-File	*.bit	FPGA Configuration File
DebugProbes-File	*.ltx	Definition File for Vivado/Vivado Labtools Debugging Interface
Diverse Reports	---	Report files in different formats
LabTools Project-File	*.lpr	Vivado Labtools Project File

Component	Description
Xilinx-IP	VIO (Virtual Input/Output)
TE-IP	Labtools Frequency Counter, Startupe2 Primitive Wrapper

File	File-Extension	Description
BIT-File	*.bit	FPGA Configuration File
DebugProbes-File	*.ltx	Definition File for Vivado/Vivado Labtools Debugging Interface
Diverse Reports	---	Report files in different formats
LabTools Project-File	*.lpr	Vivado Labtools Project File
MCS-File	*.mcs	Flash Configuration File with Boot-Image (MicroBlaze or FPGA part only)

Directory	Content
PCN	Product change notifications: Important changes between hardware revisions
Reference Design	Reference Designs sort by ISE/EDK Version
REV0x	Documents and source files sorted by PCB revision. Connector Pinout Viewer/XDC-Generator available on TE Master Pinout, as well as a additional informations on All Trenz Electronic SoMs
	Documents	PDF documents, like Technical Reference Manual, Schematics, Assembly Diagrams and...
	Firmware	Initial configuration for diverse PCB components, like CPLD, PLL and ...
	HW Design	Relevant files for PCB-Design, like PCB-STEP-Model, Cooler-STEP-Model, Trace-length, Altium libraries / projects (only for selected carrier boards), and ...
	Pictures	PCB-Pictures

Directory	Content
PCN	Product change notifications: Important changes between hardware revisions
REV0x	Documents and source files sorted by PCB revision. Connector Pinout Viewer/XDC-Generator available on TE Master Pinout, as well as a additional informations on All Trenz Electronic SoMs
	Documents	PDF documents, like Technical Reference Manual, Schematics, Assembly Diagrams and...
	Firmware	Initial configuration for diverse PCB components, like CPLD, PLL and ...
	HW Design	Relevant files for PCB-Design, like PCB-STEP-Model, Cooler-STEP-Model, Trace-length, Altium libraries / projects (only for selected carrier boards), and ...
	Pictures	PCB-Pictures

Component	Description
Interface IPs	DDR3, GPIO, Uart0, QSPI and Ethernet

Application	Description
hello_world	Xilinx Hello World Example (.elf file only)

File	File-Extension	Description
MCS-File	*.mcs	Flash Configuration File with Boot-Image (MicroBlaze or FPGA part only)
Bit-File	*.bit	FPGA Configuration File
Software-Application-File	*.elf	Software Application for Zynq or MicroBlaze Processor Systems
Hardware-Platform-Specification-Files	*.hdf	Hardware Specification from the vivado project. Used in SDK/HSI
MMI-File	*.mmi	File with BRAM-Location to generate MCS or BIT-File with *.elf content (MicroBlaze only)
Diverse Reports	--	Report files in different formats

Component	Description
Xilinx-IP	MicroBlaze, MB-Debug, Uartlite, MIG7 for DDR3, QSPI, Timer, Ethernet Lite
TE-IP	ASIO GPIO (AXI-Stream to GPIO)

Application	Description
Hello World	Xilinx Hello world ( generate elf file only)

File	File-Extension	Description
MCS-File	*.mcs	Flash Configuration File with Boot-Image (MicroBlaze or FPGA part only)
BIT-File	*.bit	FPGA Configuration File
Software-Application-File	*.elf	Software Application for Zynq or MicroBlaze Processor Systems
Hardware-Platform-Specification-Files	*.hdf	Exported Vivado Hardware Specification for SDK/HSI
MMI-File	*.mmi	File with BRAM-Location to generate MCS or BIT-File with *.elf content (MicroBlaze only)
Diverse Reports	--	Report files in different formats

Component	Description
Xilinx-IP	VIO,ILA
TE-IP	unio_mac

File	File-Extension	Description
BIT-File	*.bit	FPGA Configuration File
DebugProbes-File	*.ltx	Definition File for Vivado/Vivado Labtools Debugging Interface
Diverse Reports	---	Report files in different formats
Hardware-Platform-Specification-Files	*.hdf	Exported Vivado Hardware Specification for SDK/HSI
LabTools Project-File	*.lpr	Vivado Labtools Project File

Component	Description
Interface IPs	QSPI, Uart, ASIO (Axi-Stream to IO)

Application	Description
hello_world	Xilinx Hello World Example

File	File-Extension	Description
MCS-File	*.mcs	Flash Configuration File with Boot-Image (MicroBlaze or FPGA part only)
Bit-File	*.bit	FPGA Configuration File
Software-Application-File	*.elf	Software Application for Zynq or MicroBlaze Processor Systems
Hardware-Platform-Specification-Files	*.hdf	Hardware Specification from the vivado project. Used in SDK/HSI
MMI-File	*.mmi	File with BRAM-Location to generate MCS or BIT-File with *.elf content (MicroBlaze only)
Diverse Reports	--	Report files in different formats

Component	Description
Xilinx-IP	ILA, VIO, CLK-Wizard
TE-IP	F32C, Vector_LED, UART_MON

File	File-Extension	Description
BIT-File	*.bit	FPGA Configuration File
DebugProbes-File	*.ltx	Definition File for Vivado/Vivado Labtools Debugging Interface
Diverse Reports	---	Report files in different formats
LabTools Project-File	*.lpr	Vivado Labtools Project File
MCS-File	*.mcs	Flash Configuration File with Boot-Image (MicroBlaze or FPGA part only)

Component	Description
IP-Interfaces	DDR3, QSPI, Uart, I2C, Ethernet, ASIO (AXI-Stream to IO)

Application	Description
hello_world	Xilinx Hello World Example (.elf only)

File	File-Extension	Description
MCS-File	*.mcs	Flash Configuration File with Boot-Image (MicroBlaze or FPGA part only)
Bit-File	*.bit	FPGA Configuration File
Software-Application-File	*.elf	Software Application for Zynq or MicroBlaze Processor Systems
Hardware-Platform-Specification-Files	*.hdf	Hardware Specification from the vivado project. Used in SDK/HSI
MMI-File	*.mmi	File with BRAM-Location to generate MCS or BIT-File with *.elf content (MicroBlaze only)
Diverse Reports	--	Report files in different formats

Component	Description
Xilinx-IP	AXI Timer, AXI Interrupt Controller,MIG, AXI QSPI, AXI Uart Lite, AXI I2C, AXI Ethernet Lite, VIO
TE-IP	ASIO (AXI-Stream to IO), labtools_fmeter

Application	Description
hello_world	Xilinx Hello World Example (.elf only)
te_spi_bootloader	SPI Bootloader (.elf only)

File	File-Extension	Description
MCS-File	*.mcs	Flash Configuration File with Boot-Image (MicroBlaze or FPGA part only)
BIT-File	*.bit	FPGA Configuration File
Software-Application-File	*.elf	Software Application for Zynq or MicroBlaze Processor Systems
Hardware-Platform-Specification-Files	*.hdf	Exported Vivado Hardware Specification for SDK/HSI
MMI-File	*.mmi	File with BRAM-Location to generate MCS or BIT-File with *.elf content (MicroBlaze only)
Diverse Reports	--	Report files in different formats

Component	Description
Xilinx-IP	AXI Timer, AXI Interrupt Controller,MIG, AXI QSPI, AXI Uart Lite, AXI I2C, AXI Ethernet Lite

Application	Description
hello_world	Xilinx Hello World Example (.elf only)
memory_tests	Xilinx Memory Example (.elf only)

File	File-Extension	Description
BIT-File	*.bit	FPGA Configuration File
Diverse Reports	---	Report files in different formats
Hardware-Platform-Specification-Files	*.hdf	Exported Vivado Hardware Specification for SDK/HSI
LabTools Project-File	*.lpr	Vivado Labtools Project File
MCS-File	*.mcs	Flash Configuration File with Boot-Image (MicroBlaze or FPGA part only)
MMI-File	*.mmi	File with BRAM-Location to generate MCS or BIT-File with *.elf content (MicroBlaze only)
Software-Application-File	*.elf	Software Application for Zynq or MicroBlaze Processor Systems

Component	Description
Zynq Processor	activated MIO-Interfaces: DDR3, QSPI, GPIO,2x Uart, QSPI,2x I2C,2x SD,1x Ethernet

Application	Description
zynq_fsbl	Zynq First Stage Bootloader (for hdmi modified and provided as library in /sw_lib/)
hello_world	Xilinx Hello World Example

Digilent
OHO-Elektronik
Sundance
Trenz_Electronic - Documents and Design files for Trenz Electronic Products
inrevium
reference
Files SBSE____.ZZC
Size 4 B / Modified 29.09.2026 - 16:31:35

TE0820 - 4 x 5 cm SoC module with AMD Zynq™ UltraScale+™

TE0820 - Wiki with TRM, reference projects, application notes and more
- TE0820 TRM - Technical Reference Manual
- TE0820 Product Change Notifications - PCN (see also Schematic Change History and TRM)
- TE0820 AN - Design and Advisory Notes
- TE0820 CPLD Firmware - Firmware Description
- TE0820 Reference Designs - Reference Design description for Vivado 2017.2 and newer
4 x 5 SoM Integration Guide - module and carrier board power connection, PCB Design notes and more
4 x 5 SoM LSHM B2B Connectors - overview, compatibility, mating heights and speed rating
4 x 5 SoMs Handling and Usage Precautions - general handling and removal instructions

4 x 5 Carrier

4 x 5 SoM Carriers - overview of available carrier boards for all 4 x 5 cm modules
TE0706 Board Configuration - brief overview of the required board configuration (DIP switches, jumpers, etc.) - including boot mode configuration where applicable.

3rd Party Links

Support for TE0820 modules with Vitis AI 3.0 DPU - provided by UTIA
Support for STM32H573I-DK web server - provided by UTIA
Compilation of Vitis AI 3.0 models for different configurations of AMD DPUs - provided by UTIA
Xilinx Vitis AI facedetect Demo on Trenz Electronic TE0820 4EV SoM with TE0701 06 Carrier Board and Avnet HDMI In/Out FMC Card - provided by UTIA
Two serial connected evaluation versions of FP03x8 accelerators for TE0820-03-4EV-1E module on TE0701-06 carrier board - provided by UTIA
Design Time and Run Time Resources for Zynq Ultrascale+ TE0820-03-4EV-1E with SDSoC 2018.2 Support - provided by UTIA
Video Input/Output IP Cores for TE0820 SoM with TE0701 Carrier and Avnet HDMI Input/Output FMC Module - provided by UTIA
FitOptiVis From the cloud to the edge - smart IntegraTion and OPtimization Technologies for highly efficient Image and VIdeo processing Systems - provided by UTIA
Arrowhead Tools Arrowhead Tools for Engineering of Digitalisation Solutions - provided by UTIA
Towards Ubiquitous Low-power Image Processing Platforms - provided by Sundance and other project partners
Vision, Control and Sensor solution for Precision Robotics with TE0820 module - provided by Sundance

Support

For support, please go to http://forum.trenz-electronic.de/ or contact support@trenz-electronic.de

Compatible Carrier Boards

Carrier Board for Trenz Electronic 4 x 5 Modules

This carrier board is only for the use of Trenz Electronic modules with a standard footprint of 4 x 5 cm.

Article number: TE0701-06

Stock: 84

US$236.81

Details

TE0705 - Simplified carrier board based upon TE0701

Carrier Board for 4 x 5 cm Trenz Electronic SoMs with 3 x Samtec LSHM Series Connectors, "downgraded" version from TE0701

Article number: TE0705-04

Stock: 19

US$260.61

Details

Trenz Electronic 4 x 5 Module Carrier for CRUVI Extension Boards

3 x High Speed and 1 x Low Speed CRUVI B2B connector, Altera® MAX® 10 FPGA as system controller, Gigabit RJ45 LAN socket, microSD card socket, micro USB2.0 socket

Article number: TEB0707-02

Stock: 50

US$201.11

Details

Accessories

Heat Sink for Trenz Electronic Modules TE0820/TE0821, spring-loaded embedded

Please check assembly instructions! Made especially for modules from the TE0820/TE0821 series

Article number: 33338

Stock: 35

From US$21.42

Details

Samtec Razor Beam REF-189016-01, LF-02.5, 100 pins, for all 4 x 5 SoMs

Board-to-Board connector for all 4 x 5 SoMs (JB1/JB2, JM1/JM2), lead style -02.5

Article number: 23836

Stock: 0

From US$6.74

Details

Samtec Razor Beam REF-189016-02, LF-04.0, 100 pins, for all 4 x 5 SoMs

Board-to-Board Connector for all 4 x 5 SoMs (JB1/JB2, JM1/JM2), lead style -04.0

Article number: 23838

Stock: 0

From US$3.87

Details

Samtec Razor Beam REF-189017-01, LF-02.5, 60 Pins, for all 4 x 5 SoMs

Board-to-Board Connector for all 4 x 5 SoMs (JB3/JM3), lead style -02.5

Article number: 26125

Stock: 0

From US$4.50

Details

Samtec Razor Beam REF-189017-02, LF-04.0, 60 Pins, for all 4 x 5 SoMs

Board-to-Board Connector for all 4 x 5 SoMs (JB3/JM3), lead style -04.0

Article number: 24903

Stock: 0

From US$3.57

Details

Name	Folder	Description
Source Name	<design_name><folder>	Source Description
PetaLinux Project	<design_name>/os/petalinux	PetaLinux Project with Ethernet,USB,RTC

TE0820-05-4DE81MAS Starter Kit

Product information "TE0820-05-4DE81MAS Starter Kit"

The Module: TE0820-05-4DE81MA

Key Features

Recommended Software

The Baseboard: TE0703-07

Key Features

Scope of Delivery TE0820-05-4DE81MAS Starter Kit

Additional Information

Downloads

TEC0850 Basic Design

CR00100 Basic Example

CR00100 Basic Example

CR00103 Hyperram Citrobits

CR00103 Certus Test

CR00107 Basic Hello World Example

TE0802 Basic Linux Example

TE0802 Basic Linux Example

TE0802 Basic Linux Example

TE0802 Basic Linux Example

TE0950 Vitis AI Reference Design

TE0950 Basic Linux Example

TE0950 Basic Linux Example

TEI0022 Basic Example

TEI0022 Basic Example

TE0717 Hello World Example

TEI0001 Basic Example

TEI0001 Basic Example

TEI0001 Basic Example

TEI0001 Basic Example

TEI0001 Basic Example

TEI0001 Basic Example

TEI0003 LED Sequencer Example

TEI0003 NIOS SDRAM Example

TEI0003 Basic Example

TEI0003 Basic Example

TEI0003 Basic Example

TEI0003 Basic Example

TEI0003 Basic Example

TEI0010 Basic Example

TEI0010 Basic Example

TEI0010 Basic Example

TEI0010 Basic Example

TEM0001 Test Board Example

TEI0050 Basic Example

TEI0050 Basic Example

TEI0050 Basic Example

TEI0015 DAQ Capture Demo

TEI0015 Data Capture Demo

TEI0015 Jupyter Demo

TEI0016 DAQ Capture Demo

TEI0016 Data Capture Demo

TEI0016 Jupyter Demo

TEI0023 DAQ Capture Demo

TEI0023 Data Capture Demo

TEI0023 Jupyter Demo

TE0890 Hello World Example

TE0890 Hello World Example

ZynqberryZero Demo VIDEO/AUDIO Design with RPI video camera stream to monitor

Basic Linux Example

ZynqberryZero Demo VIDEO/AUDIO Design with RPI video camera stream to monitor

ZynqberryZero Demo VIDEO/AUDIO Design with RPI video camera stream to monitor

TEM0005 Webserver Demo1

MicroBlaze Basic-System

TE0725 HyperRAM Example

TE0725 Basic Example

TE0725 HyperRAM Example

TE0725 Basic Example

TE0725 HyperRAM Example

TE0725 Basic Example

TE0725 HyperRAM Example

TE0725 Basic Example

TE0725 Basic Example

TE0725LP Frequency Measurement

TE0725LP Basic Example

TE0725LP Basic Example

TE0725LP Basic Example

TE0725LP Basic Example

TE0725LP Basic Example

TE0714 VIO LED Design