Carrier board for TEM0007 Microchip PolarFire SoC module

US$159.46

Ready to ship today, Delivery time appr. 1-3 workdays

Article number: TEB2000-01-T001

Article status: Full production

Stock: 1

Product information "Carrier board for TEM0007 Microchip PolarFire SoC module"

The Trenz Electronic TEB2000 carrier board provides functionality for development, evaluation and testing purposes of Trenz 4 x 5 cm SoMs (System on Module).

The carrier board is equipped with a broad range of various components and connectors for different configuration setups and needs. On-module functional components and multipurpose I/Os of the SoM's logic are connected via board-to-board connectors to the carrier board components and connectors for easy user access.

See page "4 x 5 cm carriers" to get information about the SoMs supported by the TE0703 carrier board.

Key Features

On Board
- System Controller (SC) (LCMXO2-1200HC-4TG144I1))
- Mini USB for JTAG and UART connection (FTDI FT2232H)
- Mini USB second UART connection (FTDI FT230XQ)
- SDIO port expander
- 4 x User LEDs
  - D1, D2 connected to SC (firmware-dependent functionality)
  - D3, D4 connected to SC and 4 x 5 SoM
- 2 x User push button
  - Connected to SC (firmware-dependent functionality)
  - Currently used for Hard- and Soft-Reset
- 4 User DIP switches
  - Enable/disable update of the SC
  - MIO0 (accessible signal by SC and SoM)
  - 2 "mode" bits
Interface
- Trenz 4 x 5 SoM socket
  - 3 x Samtec LSHM series high-speed connectors
- Micro SD card connector
- 2 x VG96 backplane connectors assembly option (mounting holes and solder pads)
- Mini or Normal USB for SoM USB-OTG connection (depends on assembly variant)
- RJ45 GbE connector
Power
- Overvoltage-, undervoltage- and reversed- supply-voltage-protection
- Barrel jack (2.1 mm) for 5V power supply input
Size
- 10 x 6.45 cm

Scope of Delivery

1 x TEB2000-01-T001 Carrier board for TEM0007 Microchip PolarFire SoC module

Note: VG96 Connector vertical (article 21545), Harting DIN41612 (female) is not included in the scope of delivery, but can be purchased as an accessory in the shop.

Info: M2.5x8 mm screws and M2.5 galvanized nuts are required for mounting the VG96 connector.

Additional Information

Manufacturer's article number: TEB2000-01-T001
Trenz Electronic Carrierboard TEB2000 Wiki
Support Forum

All modules produced by Trenz Electronic are developed and manufactured in Germany.

Properties "Carrier board for TEM0007 Microchip PolarFire SoC module"

Properties

Form Factor:	6.45 × 10 cm
Compatible with:	TEM0007

Data according to manufacturer. Errors and changes reserved.

Downloads

File	File-Extension	Description
Bit-File	*.bit	FPGA Configuration File
Diverse Reports	--	Report files in different formats

Component	Description
IP-Interfaces	I2C, ASIO (AXI-Stream to IO), SPI-Flash, Uart

Application	Description
hello_world	Xilinx Hello World Example

File	File-Extension	Description
MCS-File	*.mcs	Flash Configuration File with Boot-Image (MicroBlaze or FPGA part only)
Bit-File	*.bit	FPGA Configuration File
Software-Application-File	*.elf	Software Application for Zynq or MicroBlaze Processor Systems
Hardware-Platform-Specification-Files	*.hdf	Hardware Specification from the vivado project. Used in SDK/HSI
MMI-File	*.mmi	File with BRAM-Location to generate MCS or BIT-File with *.elf content (MicroBlaze only)
Diverse Reports	--	Report files in different formats

Component	Description
Xilinx-IP	I2C,SPI-Flash,UART
TE-IP	ASIO (AXI-Stream to IO)

Application	Description
hello_world	Xilinx Hello World Example

File	File-Extension	Description
MCS-File	*.mcs	Flash Configuration File with Boot-Image (MicroBlaze or FPGA part only)
BIT-File	*.bit	FPGA Configuration File
Software-Application-File	*.elf	Software Application for Zynq or MicroBlaze Processor Systems
Hardware-Platform-Specification-Files	*.hdf	Exported Vivado Hardware Specification for SDK/HSI
MMI-File	*.mmi	File with BRAM-Location to generate MCS or BIT-File with *.elf content (MicroBlaze only)
Diverse Reports	--	Report files in different formats

Component	Description
Xilinx-IP	VIO
TE-IP	Startupe2,LabTools Frequency Counter

File	File-Extension	Description
BIT-File	*.bit	FPGA Configuration File
DebugProbes-File	*.ltx	Definition File for Vivado/Vivado Labtools Debugging Interface
Diverse Reports	---	Report files in different formats
LabTools Project-File	*.lpr	Vivado Labtools Project File

Component	Description
Xilinx-IP	VIO (Virtual Input/Output)
TE-IP	Labtools Frequency Counter, Startupe2 Primitive Wrapper

File	File-Extension	Description
BIT-File	*.bit	FPGA Configuration File
DebugProbes-File	*.ltx	Definition File for Vivado/Vivado Labtools Debugging Interface
Diverse Reports	---	Report files in different formats
LabTools Project-File	*.lpr	Vivado Labtools Project File
MCS-File	*.mcs	Flash Configuration File with Boot-Image (MicroBlaze or FPGA part only)

Directory	Content
PCN	Product change notifications: Important changes between hardware revisions
Reference Design	Reference Designs sort by ISE/EDK Version
REV0x	Documents and source files sorted by PCB revision. Connector Pinout Viewer/XDC-Generator available on TE Master Pinout, as well as a additional informations on All Trenz Electronic SoMs
	Documents	PDF documents, like Technical Reference Manual, Schematics, Assembly Diagrams and...
	Firmware	Initial configuration for diverse PCB components, like CPLD, PLL and ...
	HW Design	Relevant files for PCB-Design, like PCB-STEP-Model, Cooler-STEP-Model, Trace-length, Altium libraries / projects (only for selected carrier boards), and ...
	Pictures	PCB-Pictures

Directory	Content
PCN	Product change notifications: Important changes between hardware revisions
REV0x	Documents and source files sorted by PCB revision. Connector Pinout Viewer/XDC-Generator available on TE Master Pinout, as well as a additional informations on All Trenz Electronic SoMs
	Documents	PDF documents, like Technical Reference Manual, Schematics, Assembly Diagrams and...
	Firmware	Initial configuration for diverse PCB components, like CPLD, PLL and ...
	HW Design	Relevant files for PCB-Design, like PCB-STEP-Model, Cooler-STEP-Model, Trace-length, Altium libraries / projects (only for selected carrier boards), and ...
	Pictures	PCB-Pictures

Component	Description
Interface IPs	DDR3, GPIO, Uart0, QSPI and Ethernet

Application	Description
hello_world	Xilinx Hello World Example (.elf file only)

File	File-Extension	Description
MCS-File	*.mcs	Flash Configuration File with Boot-Image (MicroBlaze or FPGA part only)
Bit-File	*.bit	FPGA Configuration File
Software-Application-File	*.elf	Software Application for Zynq or MicroBlaze Processor Systems
Hardware-Platform-Specification-Files	*.hdf	Hardware Specification from the vivado project. Used in SDK/HSI
MMI-File	*.mmi	File with BRAM-Location to generate MCS or BIT-File with *.elf content (MicroBlaze only)
Diverse Reports	--	Report files in different formats

Component	Description
Xilinx-IP	MicroBlaze, MB-Debug, Uartlite, MIG7 for DDR3, QSPI, Timer, Ethernet Lite
TE-IP	ASIO GPIO (AXI-Stream to GPIO)

Application	Description
Hello World	Xilinx Hello world ( generate elf file only)

File	File-Extension	Description
MCS-File	*.mcs	Flash Configuration File with Boot-Image (MicroBlaze or FPGA part only)
BIT-File	*.bit	FPGA Configuration File
Software-Application-File	*.elf	Software Application for Zynq or MicroBlaze Processor Systems
Hardware-Platform-Specification-Files	*.hdf	Exported Vivado Hardware Specification for SDK/HSI
MMI-File	*.mmi	File with BRAM-Location to generate MCS or BIT-File with *.elf content (MicroBlaze only)
Diverse Reports	--	Report files in different formats

Component	Description
Xilinx-IP	VIO,ILA
TE-IP	unio_mac

File	File-Extension	Description
BIT-File	*.bit	FPGA Configuration File
DebugProbes-File	*.ltx	Definition File for Vivado/Vivado Labtools Debugging Interface
Diverse Reports	---	Report files in different formats
Hardware-Platform-Specification-Files	*.hdf	Exported Vivado Hardware Specification for SDK/HSI
LabTools Project-File	*.lpr	Vivado Labtools Project File

Component	Description
Interface IPs	QSPI, Uart, ASIO (Axi-Stream to IO)

Application	Description
hello_world	Xilinx Hello World Example

File	File-Extension	Description
MCS-File	*.mcs	Flash Configuration File with Boot-Image (MicroBlaze or FPGA part only)
Bit-File	*.bit	FPGA Configuration File
Software-Application-File	*.elf	Software Application for Zynq or MicroBlaze Processor Systems
Hardware-Platform-Specification-Files	*.hdf	Hardware Specification from the vivado project. Used in SDK/HSI
MMI-File	*.mmi	File with BRAM-Location to generate MCS or BIT-File with *.elf content (MicroBlaze only)
Diverse Reports	--	Report files in different formats

Component	Description
Xilinx-IP	ILA, VIO, CLK-Wizard
TE-IP	F32C, Vector_LED, UART_MON

File	File-Extension	Description
BIT-File	*.bit	FPGA Configuration File
DebugProbes-File	*.ltx	Definition File for Vivado/Vivado Labtools Debugging Interface
Diverse Reports	---	Report files in different formats
LabTools Project-File	*.lpr	Vivado Labtools Project File
MCS-File	*.mcs	Flash Configuration File with Boot-Image (MicroBlaze or FPGA part only)

Component	Description
IP-Interfaces	DDR3, QSPI, Uart, I2C, Ethernet, ASIO (AXI-Stream to IO)

Application	Description
hello_world	Xilinx Hello World Example (.elf only)

File	File-Extension	Description
MCS-File	*.mcs	Flash Configuration File with Boot-Image (MicroBlaze or FPGA part only)
Bit-File	*.bit	FPGA Configuration File
Software-Application-File	*.elf	Software Application for Zynq or MicroBlaze Processor Systems
Hardware-Platform-Specification-Files	*.hdf	Hardware Specification from the vivado project. Used in SDK/HSI
MMI-File	*.mmi	File with BRAM-Location to generate MCS or BIT-File with *.elf content (MicroBlaze only)
Diverse Reports	--	Report files in different formats

Component	Description
Xilinx-IP	AXI Timer, AXI Interrupt Controller,MIG, AXI QSPI, AXI Uart Lite, AXI I2C, AXI Ethernet Lite, VIO
TE-IP	ASIO (AXI-Stream to IO), labtools_fmeter

Application	Description
hello_world	Xilinx Hello World Example (.elf only)
te_spi_bootloader	SPI Bootloader (.elf only)

File	File-Extension	Description
MCS-File	*.mcs	Flash Configuration File with Boot-Image (MicroBlaze or FPGA part only)
BIT-File	*.bit	FPGA Configuration File
Software-Application-File	*.elf	Software Application for Zynq or MicroBlaze Processor Systems
Hardware-Platform-Specification-Files	*.hdf	Exported Vivado Hardware Specification for SDK/HSI
MMI-File	*.mmi	File with BRAM-Location to generate MCS or BIT-File with *.elf content (MicroBlaze only)
Diverse Reports	--	Report files in different formats

Component	Description
Xilinx-IP	AXI Timer, AXI Interrupt Controller,MIG, AXI QSPI, AXI Uart Lite, AXI I2C, AXI Ethernet Lite

Application	Description
hello_world	Xilinx Hello World Example (.elf only)
memory_tests	Xilinx Memory Example (.elf only)

File	File-Extension	Description
BIT-File	*.bit	FPGA Configuration File
Diverse Reports	---	Report files in different formats
Hardware-Platform-Specification-Files	*.hdf	Exported Vivado Hardware Specification for SDK/HSI
LabTools Project-File	*.lpr	Vivado Labtools Project File
MCS-File	*.mcs	Flash Configuration File with Boot-Image (MicroBlaze or FPGA part only)
MMI-File	*.mmi	File with BRAM-Location to generate MCS or BIT-File with *.elf content (MicroBlaze only)
Software-Application-File	*.elf	Software Application for Zynq or MicroBlaze Processor Systems

Component	Description
Zynq Processor	activated MIO-Interfaces: DDR3, QSPI, GPIO,2x Uart, QSPI,2x I2C,2x SD,1x Ethernet

Application	Description
zynq_fsbl	Zynq First Stage Bootloader (for hdmi modified and provided as library in /sw_lib/)
hello_world	Xilinx Hello World Example

Digilent
OHO-Elektronik
Sundance
Trenz_Electronic - Documents and Design files for Trenz Electronic Products
inrevium
reference
Files SBSE____.ZZC
Size 4 B / Modified 29.09.2026 - 16:31:35

TEB2000 - 4 x 5 cm carrier for TEM0007

TEB2000 AN- Wiki with TRM, reference projects, application notes and more
- TEB2000 TRM - Technical Reference Manual
- TEB2000 CPLD Firmware - Firmware Description
- TEB2000 PCN - Product Change Notification (see also Schematic Change History and TRM)
- TEB2000 AN - Advisory Note
4 x 5 SoM LSHM B2B Connectors- overview, compatibility, mating heights and speed rating
TEB2000 Getting Started- Basic note to start up Carrier with TEM0007 modules
4 x 5 SoMs Handling and Usage Precautions- general handling and removal instructions

4 x 5 Carrier

4 x 5 SoM Carriers- overview of available carrier boards for all 4 x 5 cm modules

3rd Party Links

currently not available

Support

For support, please go to http://forum.trenz-electronic.de/ or contact support@trenz-electronic.de

Accessories

VG96 Connector vertical, Harting DIN41612 (female)

Harting DIN 41612 connectors, series 09 03, female, 2.54mm, 96-pin, 3-row, a/b/c, straight

Article number: 21545

Stock: 0

From US$2.14

Details

VG96 Connector vertical, TE Connectivity DIN41612 (male)

TE Connectivity DIN 41612 connector

Article number: 25190

Stock: 0

From US$4.64

Details

Microchip PolarFire® SoC FPGA 25T-FE, 1 GByte LPDDR4 SDRAM, 4 x 5 cm

Commercial-grade Microchip PolarFire® MPFS025T-FCVG484E FPGA, 1 GByte LPDDR4 SDRAM, 64 MByte SPI Flash, size: 4 x 5 cm

Article number: TEM0007-01-CAA11-A

Stock: 0

From US$218.46

Details

Microchip PolarFire® SoC FPGA 95T-1I, 1 GByte LPDDR4 SDRAM, 4 x 5 cm

Industrial-grade Microchip PolarFire® MPFS095T-1FCVG484I FPGA, 1 GByte LPDDR4 SDRAM, 64 MByte SPI Flash, size: 4 x 5 cm

Article number: TEM0007-01-CBD11-A

Stock: 0

From US$302.18

Details

Microchip PolarFire® SoC FPGA 250T-FE, 1 GByte LPDDR4 SDRAM, 4 x 5 cm

Commercial-grade Microchip PolarFire® MPFS250T-FCVG484E FPGA, 1 GByte LPDDR4 SDRAM, 64 MByte SPI Flash, size: 4 x 5 cm

Article number: TEM0007-01-CHE11-A

Stock: 0

From US$365.96

Details

Name	Folder	Description
Source Name	<design_name><folder>	Source Description
PetaLinux Project	<design_name>/os/petalinux	PetaLinux Project with Ethernet,USB,RTC

Carrier board for TEM0007 Microchip PolarFire SoC module

Product information "Carrier board for TEM0007 Microchip PolarFire SoC module"

Key Features

Scope of Delivery

Additional Information

Downloads

TEC0850 Basic Design

CR00100 Basic Example

CR00100 Basic Example

CR00103 Hyperram Citrobits

CR00103 Certus Test

CR00107 Basic Hello World Example

TE0802 Basic Linux Example

TE0802 Basic Linux Example

TE0802 Basic Linux Example

TE0802 Basic Linux Example

TE0950 Vitis AI Reference Design

TE0950 Basic Linux Example

TE0950 Basic Linux Example

TEI0022 Basic Example

TEI0022 Basic Example

TE0717 Hello World Example

TEI0001 Basic Example

TEI0001 Basic Example

TEI0001 Basic Example

TEI0001 Basic Example

TEI0001 Basic Example

TEI0001 Basic Example

TEI0003 LED Sequencer Example

TEI0003 NIOS SDRAM Example

TEI0003 Basic Example

TEI0003 Basic Example

TEI0003 Basic Example

TEI0003 Basic Example

TEI0003 Basic Example

TEI0010 Basic Example

TEI0010 Basic Example

TEI0010 Basic Example

TEI0010 Basic Example

TEM0001 Test Board Example

TEI0050 Basic Example

TEI0050 Basic Example

TEI0050 Basic Example

TEI0015 DAQ Capture Demo

TEI0015 Data Capture Demo

TEI0015 Jupyter Demo

TEI0016 DAQ Capture Demo

TEI0016 Data Capture Demo

TEI0016 Jupyter Demo

TEI0023 DAQ Capture Demo

TEI0023 Data Capture Demo

TEI0023 Jupyter Demo

TE0890 Hello World Example

TE0890 Hello World Example

ZynqberryZero Demo VIDEO/AUDIO Design with RPI video camera stream to monitor

Basic Linux Example

ZynqberryZero Demo VIDEO/AUDIO Design with RPI video camera stream to monitor

ZynqberryZero Demo VIDEO/AUDIO Design with RPI video camera stream to monitor

TEM0005 Webserver Demo1

MicroBlaze Basic-System

TE0725 HyperRAM Example

TE0725 Basic Example

TE0725 HyperRAM Example

TE0725 Basic Example

TE0725 HyperRAM Example

TE0725 Basic Example

TE0725 HyperRAM Example

TE0725 Basic Example

TE0725 Basic Example

TE0725LP Frequency Measurement

TE0725LP Basic Example

TE0725LP Basic Example

TE0725LP Basic Example

TE0725LP Basic Example

TE0725LP Basic Example

TE0714 VIO LED Design

TE0714 Basic Barmetal Example

TE0763 Hello World Example

TE0710 MicroBlaze System

TE0710 UNIO MAC