Skip to main content Skip to search Skip to main navigation

Baseboard for TE0955

Product information "Baseboard for TE0955"

This article is the replacement for the TEB0955-01-A.

The carrier board TEB0955 was especially designed and developed for the use of Trenz Electronic module TE0955.

Key Features

  • B2B-Connectors
    Samtec ADF B2B connectors: 2x 240 pin

  • Supported SoM
    TE0955, (AM0010)

  • IO resources:
    QSFP, 4x Transceivers
    M.2 Key M, 4x Transceivers (2280 default, option: 2260, 2242, 2230)
    2x CRUVI HS (MIPI ready, together 4x 4 Lane MIPI)
    1x CRUVI LS
    1x GB Ethernet
    1x micro SD 3.0 slot
    1x USB-C (USB 2.0, dual role)
    1x USB-C (USB 2.0, JTAG + UART)
    1x CAN
    optional: several pin headers for I2C, UART, LEDs, RST Buttons, MIO GPIOs

  • Clock sources:
    I2C programmable MGT Clock (default: 156.25MHz)
    PCIe common clock 100MHz
    optional: fixed MGT Clock
    optional: I2C programmable MGT Clock

  • On-Board periphery 
    FTDI USB to JTAG + UART bridge
    Boot Mode Dips (4x)
    Reset Buttons

  • Size: 105 mm x 150 mm

  • Supply: 12V (2.1mm barrel connector)

Scope of Delivery TE0955-02-EGBE32AS Starter Kit

  • 1 x TEB0955-02-A carrier board for Trenz Electronic modules with 4 x 5 cm form factor

Additional Information

All modules produced by Trenz Electronic are developed and manufactured in Germany.

Downloads

Digilent
OHO-Elektronik
Sundance
Trenz_Electronic - Documents and Design files for Trenz Electronic Products