Skip to main content Skip to search Skip to main navigation

MPSoC Module with AMD Zynq™ UltraScale+™ 3CG-L1I, 1 GB LPDDR4, 4 x 5 cm

Product information "MPSoC Module with AMD Zynq™ UltraScale+™ 3CG-L1I, 1 GB LPDDR4, 4 x 5 cm"

The predecessor of this article is TE0823-01-3PIU1FA. All changes are in the Product Change Notification (PCN).

The Trenz Electronic TE0823-01-3PIU1MA is an industrial-grade MPSoC module integrating a low power AMD Zynq™ UltraScale+™ ZU3CG, 1 GByte LPDDR4 SDRAM, 128 MByte Flash memory for configuration and operation, a Lattice Mach XO2 CPLD for system controlling and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/O's is provided via rugged high-speed stacking connections.

All this on a tiny footprint, smaller than a credit card, at the most competitive price. Modules in 4 x 5 cm form factor are fully mechanically and largely electrically compatible among each other.

All parts are at least industrial temperature range of -40°C to +85°C. The module operating temperature range depends on customer design and cooling solution. Please contact us for options.

Key Features

  • General
    • Rugged for shock and high vibration
    • Evenly spread supply pins for good signal integrity
    • Plug-on module with 2 x 100 pin and 1 x 60 pin Razor Beam High-Speed hermaphroditic headers for high speeds (regular 4 mm)

  • SoC / FPGA
    • AMD Zynq™ UltraScale+™ XCZU3CG-L1SFVC784I (Low Power)
    • Device: ZU3
    • Engine: CG
    • Speedgrade: -1L (also non-low power assembly options possible)
    • Temperature range: industrial
    • Package: SFVC784

  • RAM / Storage
    • 2 x 64 MByte QSPI Boot Flash in dual parallel mode
    • 1 GByte LPDDR4 SDRAM
    • 8 GByte e.MMC memory with 8 bit data width
    • 2 Kbit serielles EEPROM with EUI-48 node identity

  • On Board
    • Lattice LCMXO2 - System Controller
    • Programmable Clock Generator PLL SI5338
    • Gigabit Ethernet transceiver PHY
    • High-Speed USB2.0 ULPI transceiver with full OTG support
    • 4 x LEDs

  • Interfaces
    • 4 x 5 SoM 3 x B2B Connector (Samtec LSHM) socket:
      • I/O HP PL: 132x
      • MIO PS: 14x
      • MGT: 4 x GTR
      • JTAG / USB / ETH

  • Power
    • All power regulators on board

  • Dimension
    • 4 x 5 cm

Other assembly options for cost or performance optimization plus high volume prices available on request.

Recommended Software

Vivado Standard Edition (free version)

The Vivado Standard Edition is the FREE version of the Vivado design suite. Vivado Standard delivers instant access to some basic Vivado features and functionality at no cost.

Overview Vivado Standard and Enterprise Edition

Development Support

There are different base boards available for this module.

Latest documentation, design support files and reference designs with source files are available for download free of charge.

Applications

  • Sensor Processing & Fusion
  • Motor Control
  • Low-cost Ultrasound
  • Traffic Engineering

Scope of Delivery

  • 1 x TE0823-01-3PIU1MA Trenz Electronic MPSoC Module with AMD Zynq™ UltraScale+™ ZU3CG (Low Power)
  • 8 x screws
  • 4 x bolts

Additional Information

All modules produced by Trenz Electronic are developed and manufactured in Germany.

Downloads

Digilent
OHO-Elektronik
Sundance
Trenz_Electronic - Documents and Design files for Trenz Electronic Products