SoC Module with AMD Zynq™ 7030-1C, 1 GByte DDR3L, 32 MByte Flash, 4 x 5 cm

US$659.26

Possible to order, delivery time on request.

Article number: TE0715-05-71C33-A

Article status: Full production

Stock: 0

Quantity	Unit price
To 9	US$659.26
From 10	US$593.33
From 25	US$560.37
From 50	US$527.41
From 100	US$494.45
From 250	US$461.48
From 500	US$428.52
From 1000	US$395.56

Product information "SoC Module with AMD Zynq™ 7030-1C, 1 GByte DDR3L, 32 MByte Flash, 4 x 5 cm"

The predecessor of this article is TE0715-04-71C33-A. All changes are in the Product Change Notification (PCN).

The Trenz Electronic TE0715-05-71C33-A is a SoC module integrating a AMD Zynq™ Z-7030 with 4 MGT Links, a Gigabit Ethernet transceiver, 1 GByte DDR3L SDRAM, 32 MByte SPI Flash memory for conﬁguration and operation, and powerful switch-mode power supplies for all on-board voltages. A large number of conﬁgurable I/O's is provided via rugged high-speed stacking strips.

All this on a tiny footprint, smaller than a credit card, at the most competitive price. Modules in 4 x 5 cm form factor are fully mechanically and largely electrically compatible among each other.

All parts are at least commercial temperature range of 0°C to +70°C. The module operating temperature range depends on customer design and cooling solution. Please contact us for options.

Key Features

AMD Zynq™ XC7Z030-1SBG485C SoC
Rugged for shock and high vibration
ARM dual-core Cortex-A9 MPCore
10/100/1000 tri-speed gigabit Ethernet transceiver (PHY) with SGMII
MAC Address EEPROM
USB 2.0 high-speed ULPI transceiver
1 GByte (32-bit) DDR3L SDRAM
32 MByte QSPI Flash memory (with XiP support)
Programmable Clock Generator: Transceiver Clock (default 125 MHz)
Plug-on module with 2 x 100-pin and 1 x 60-pin Razor Beam High-Speed hermaphroditic Terminal/Socket Strips (regular 4 mm)
132 FPGA I/O's (65 LVDS pairs possible) and 14 PS-MIO available on board-to-board connectors
4 GTP/GTX Tranceivers
On-board high-efficiency DC-DC converters
- 4.0 A x 1.0V power rail
- 3.0 A x 1.5V power rail
Temperature compensated RTC (real-time clock)
System management
eFUSE bit-stream encryption
AES bit-stream encryption
User LED
Evenly-spread supply pins for good signal integrity

Other assembly options for cost or performance optimization plus high volume prices available on request.

Recommended Software

Vivado Standard Edition (free version)

The Vivado Standard Edition is the FREE version of the Vivado design suite. Vivado Standard delivers instant access to some basic Vivado features and functionality at no cost.

Overview Vivado Standard and Enterprise Edition

Development Support

There are different base boards available for this module.

Latest documentation, design support files and reference designs with source files are available for download free of charge.

Scope of Delivery

1 x TE0715-05-71C33-A Trenz Electronic 4 x 5 cm SoC module with AMD Zynq™ 7030
8 x screws
4 x bolts

Additional Information

Manufacturer's article number: TE0715-05-71C33-A
Trenz Electronic TE0715 Wiki
Samtec LSHM Razor Beam, High-Speed Hermaphroditic Terminal/Socket Strips, regular 4 mm,
overview, compatibility, mating heights and speed rating: Wiki, mounted on every 4 x 5 cm module of Trenz Electronic
Support Forum

All modules produced by Trenz Electronic are developed and manufactured in Germany.

Properties "SoC Module with AMD Zynq™ 7030-1C, 1 GByte DDR3L, 32 MByte Flash, 4 x 5 cm"

Properties

FPGA Manufacturer:	AMD
FPGA/SoC Architecture:	7 Series
FPGA/SoC Family:	Zynq
FPGA/SoC Type:	SoC
Form Factor:	4 × 5 cm

Data according to manufacturer. Errors and changes reserved.

Downloads

File	File-Extension	Description
Bit-File	*.bit	FPGA Configuration File
Diverse Reports	--	Report files in different formats

Component	Description
IP-Interfaces	I2C, ASIO (AXI-Stream to IO), SPI-Flash, Uart

Application	Description
hello_world	Xilinx Hello World Example

File	File-Extension	Description
MCS-File	*.mcs	Flash Configuration File with Boot-Image (MicroBlaze or FPGA part only)
Bit-File	*.bit	FPGA Configuration File
Software-Application-File	*.elf	Software Application for Zynq or MicroBlaze Processor Systems
Hardware-Platform-Specification-Files	*.hdf	Hardware Specification from the vivado project. Used in SDK/HSI
MMI-File	*.mmi	File with BRAM-Location to generate MCS or BIT-File with *.elf content (MicroBlaze only)
Diverse Reports	--	Report files in different formats

Component	Description
Xilinx-IP	I2C,SPI-Flash,UART
TE-IP	ASIO (AXI-Stream to IO)

Application	Description
hello_world	Xilinx Hello World Example

File	File-Extension	Description
MCS-File	*.mcs	Flash Configuration File with Boot-Image (MicroBlaze or FPGA part only)
BIT-File	*.bit	FPGA Configuration File
Software-Application-File	*.elf	Software Application for Zynq or MicroBlaze Processor Systems
Hardware-Platform-Specification-Files	*.hdf	Exported Vivado Hardware Specification for SDK/HSI
MMI-File	*.mmi	File with BRAM-Location to generate MCS or BIT-File with *.elf content (MicroBlaze only)
Diverse Reports	--	Report files in different formats

Component	Description
Xilinx-IP	VIO
TE-IP	Startupe2,LabTools Frequency Counter

File	File-Extension	Description
BIT-File	*.bit	FPGA Configuration File
DebugProbes-File	*.ltx	Definition File for Vivado/Vivado Labtools Debugging Interface
Diverse Reports	---	Report files in different formats
LabTools Project-File	*.lpr	Vivado Labtools Project File

Component	Description
Xilinx-IP	VIO (Virtual Input/Output)
TE-IP	Labtools Frequency Counter, Startupe2 Primitive Wrapper

File	File-Extension	Description
BIT-File	*.bit	FPGA Configuration File
DebugProbes-File	*.ltx	Definition File for Vivado/Vivado Labtools Debugging Interface
Diverse Reports	---	Report files in different formats
LabTools Project-File	*.lpr	Vivado Labtools Project File
MCS-File	*.mcs	Flash Configuration File with Boot-Image (MicroBlaze or FPGA part only)

Directory	Content
PCN	Product change notifications: Important changes between hardware revisions
Reference Design	Reference Designs sort by ISE/EDK Version
REV0x	Documents and source files sorted by PCB revision. Connector Pinout Viewer/XDC-Generator available on TE Master Pinout, as well as a additional informations on All Trenz Electronic SoMs
	Documents	PDF documents, like Technical Reference Manual, Schematics, Assembly Diagrams and...
	Firmware	Initial configuration for diverse PCB components, like CPLD, PLL and ...
	HW Design	Relevant files for PCB-Design, like PCB-STEP-Model, Cooler-STEP-Model, Trace-length, Altium libraries / projects (only for selected carrier boards), and ...
	Pictures	PCB-Pictures

Directory	Content
PCN	Product change notifications: Important changes between hardware revisions
REV0x	Documents and source files sorted by PCB revision. Connector Pinout Viewer/XDC-Generator available on TE Master Pinout, as well as a additional informations on All Trenz Electronic SoMs
	Documents	PDF documents, like Technical Reference Manual, Schematics, Assembly Diagrams and...
	Firmware	Initial configuration for diverse PCB components, like CPLD, PLL and ...
	HW Design	Relevant files for PCB-Design, like PCB-STEP-Model, Cooler-STEP-Model, Trace-length, Altium libraries / projects (only for selected carrier boards), and ...
	Pictures	PCB-Pictures

Component	Description
Interface IPs	DDR3, GPIO, Uart0, QSPI and Ethernet

Application	Description
hello_world	Xilinx Hello World Example (.elf file only)

File	File-Extension	Description
MCS-File	*.mcs	Flash Configuration File with Boot-Image (MicroBlaze or FPGA part only)
Bit-File	*.bit	FPGA Configuration File
Software-Application-File	*.elf	Software Application for Zynq or MicroBlaze Processor Systems
Hardware-Platform-Specification-Files	*.hdf	Hardware Specification from the vivado project. Used in SDK/HSI
MMI-File	*.mmi	File with BRAM-Location to generate MCS or BIT-File with *.elf content (MicroBlaze only)
Diverse Reports	--	Report files in different formats

Component	Description
Xilinx-IP	MicroBlaze, MB-Debug, Uartlite, MIG7 for DDR3, QSPI, Timer, Ethernet Lite
TE-IP	ASIO GPIO (AXI-Stream to GPIO)

Application	Description
Hello World	Xilinx Hello world ( generate elf file only)

File	File-Extension	Description
MCS-File	*.mcs	Flash Configuration File with Boot-Image (MicroBlaze or FPGA part only)
BIT-File	*.bit	FPGA Configuration File
Software-Application-File	*.elf	Software Application for Zynq or MicroBlaze Processor Systems
Hardware-Platform-Specification-Files	*.hdf	Exported Vivado Hardware Specification for SDK/HSI
MMI-File	*.mmi	File with BRAM-Location to generate MCS or BIT-File with *.elf content (MicroBlaze only)
Diverse Reports	--	Report files in different formats

Component	Description
Xilinx-IP	VIO,ILA
TE-IP	unio_mac

File	File-Extension	Description
BIT-File	*.bit	FPGA Configuration File
DebugProbes-File	*.ltx	Definition File for Vivado/Vivado Labtools Debugging Interface
Diverse Reports	---	Report files in different formats
Hardware-Platform-Specification-Files	*.hdf	Exported Vivado Hardware Specification for SDK/HSI
LabTools Project-File	*.lpr	Vivado Labtools Project File

Component	Description
Interface IPs	QSPI, Uart, ASIO (Axi-Stream to IO)

Application	Description
hello_world	Xilinx Hello World Example

File	File-Extension	Description
MCS-File	*.mcs	Flash Configuration File with Boot-Image (MicroBlaze or FPGA part only)
Bit-File	*.bit	FPGA Configuration File
Software-Application-File	*.elf	Software Application for Zynq or MicroBlaze Processor Systems
Hardware-Platform-Specification-Files	*.hdf	Hardware Specification from the vivado project. Used in SDK/HSI
MMI-File	*.mmi	File with BRAM-Location to generate MCS or BIT-File with *.elf content (MicroBlaze only)
Diverse Reports	--	Report files in different formats

Component	Description
Xilinx-IP	ILA, VIO, CLK-Wizard
TE-IP	F32C, Vector_LED, UART_MON

File	File-Extension	Description
BIT-File	*.bit	FPGA Configuration File
DebugProbes-File	*.ltx	Definition File for Vivado/Vivado Labtools Debugging Interface
Diverse Reports	---	Report files in different formats
LabTools Project-File	*.lpr	Vivado Labtools Project File
MCS-File	*.mcs	Flash Configuration File with Boot-Image (MicroBlaze or FPGA part only)

Component	Description
IP-Interfaces	DDR3, QSPI, Uart, I2C, Ethernet, ASIO (AXI-Stream to IO)

Application	Description
hello_world	Xilinx Hello World Example (.elf only)

File	File-Extension	Description
MCS-File	*.mcs	Flash Configuration File with Boot-Image (MicroBlaze or FPGA part only)
Bit-File	*.bit	FPGA Configuration File
Software-Application-File	*.elf	Software Application for Zynq or MicroBlaze Processor Systems
Hardware-Platform-Specification-Files	*.hdf	Hardware Specification from the vivado project. Used in SDK/HSI
MMI-File	*.mmi	File with BRAM-Location to generate MCS or BIT-File with *.elf content (MicroBlaze only)
Diverse Reports	--	Report files in different formats

Component	Description
Xilinx-IP	AXI Timer, AXI Interrupt Controller,MIG, AXI QSPI, AXI Uart Lite, AXI I2C, AXI Ethernet Lite, VIO
TE-IP	ASIO (AXI-Stream to IO), labtools_fmeter

Application	Description
hello_world	Xilinx Hello World Example (.elf only)
te_spi_bootloader	SPI Bootloader (.elf only)

File	File-Extension	Description
MCS-File	*.mcs	Flash Configuration File with Boot-Image (MicroBlaze or FPGA part only)
BIT-File	*.bit	FPGA Configuration File
Software-Application-File	*.elf	Software Application for Zynq or MicroBlaze Processor Systems
Hardware-Platform-Specification-Files	*.hdf	Exported Vivado Hardware Specification for SDK/HSI
MMI-File	*.mmi	File with BRAM-Location to generate MCS or BIT-File with *.elf content (MicroBlaze only)
Diverse Reports	--	Report files in different formats

Component	Description
Xilinx-IP	AXI Timer, AXI Interrupt Controller,MIG, AXI QSPI, AXI Uart Lite, AXI I2C, AXI Ethernet Lite

Application	Description
hello_world	Xilinx Hello World Example (.elf only)
memory_tests	Xilinx Memory Example (.elf only)

File	File-Extension	Description
BIT-File	*.bit	FPGA Configuration File
Diverse Reports	---	Report files in different formats
Hardware-Platform-Specification-Files	*.hdf	Exported Vivado Hardware Specification for SDK/HSI
LabTools Project-File	*.lpr	Vivado Labtools Project File
MCS-File	*.mcs	Flash Configuration File with Boot-Image (MicroBlaze or FPGA part only)
MMI-File	*.mmi	File with BRAM-Location to generate MCS or BIT-File with *.elf content (MicroBlaze only)
Software-Application-File	*.elf	Software Application for Zynq or MicroBlaze Processor Systems

Component	Description
Zynq Processor	activated MIO-Interfaces: DDR3, QSPI, GPIO,2x Uart, QSPI,2x I2C,2x SD,1x Ethernet

Digilent
OHO-Elektronik
Sundance
Trenz_Electronic - Documents and Design files for Trenz Electronic Products
inrevium
reference
Files SBSE____.ZZC
Size 4 B / Modified 29.09.2026 - 16:31:35

TE0715 - 4 x 5 cm SoC Module with Xilinx Zynq-7015/-7030

TE0715 - Wiki with TRM, reference projects, application notes and more
- TE0715 TRM - Technical Reference Manual
- TE0715 Reference Designs - Reference Design Description for Vivado 2017.2 and newer
- TE0715 CPLD Firmware - Firmware Description
- TE0715 Product Change Notifications - PCN (see also Schematic Change History and TRM)
- TE0715 AN - Design and Advisory Notes
4 x 5 SoM Integration Guide - module and carrier board power connection, PCB Design notes and more
4 x 5 SoM LSHM B2B Connectors - overview, compatibility, mating heights and speed rating
4 x 5 SoMs Handling and Usage Precautions - general handling and removal instructions

4 x 5 Carrier

4 x 5 SoM Carriers - overview of available carrier boards for all 4 x 5 cm modules

Support

For support, please go to http://forum.trenz-electronic.de/ or contact support@trenz-electronic.de

Accessories

Samtec Razor Beam REF-189016-02, LF-04.0, 100 pins, for all 4 x 5 SoMs

Board-to-Board Connector for all 4 x 5 SoMs (JB1/JB2, JM1/JM2), lead style -04.0

Article number: 23838

Stock: 0

From US$3.87

Details

Samtec Razor Beam REF-189017-02, LF-04.0, 60 Pins, for all 4 x 5 SoMs

Board-to-Board Connector for all 4 x 5 SoMs (JB3/JM3), lead style -04.0

Article number: 24903

Stock: 0

From US$3.57

Details

Heat Sink for Trenz Electronic Modules TE0715, spring-loaded embedded

Please check assembly instructions! Made especially for modules from the TE0715 series

Article number: 26923

Stock: 53

From US$24.28

Details

Carrier Board for Trenz Electronic 4 x 5 Modules

This carrier board is only for the use of Trenz Electronic modules with a standard footprint of 4 x 5 cm.

Article number: TE0701-06

Stock: 0

US$236.81

Details

TE0705 - Simplified carrier board based upon TE0701

Carrier Board for 4 x 5 cm Trenz Electronic SoMs with 3 x Samtec LSHM Series Connectors, "downgraded" version from TE0701

Article number: TE0705-04

Stock: 19

US$260.61

Details

Trenz Electronic 4 x 5 Module Carrier for CRUVI Extension Boards

3 x High Speed and 1 x Low Speed CRUVI B2B connector, Altera® MAX® 10 FPGA as system controller, Gigabit RJ45 LAN socket, microSD card socket, micro USB2.0 socket

Article number: TEB0707-02

Stock: 50

US$201.11

Details

Application	Description
zynq_fsbl	Default Xilinx FSBL
u-boot	Petalinux-Uboot (image.ub in <design_name>/prebuilt/os/petalinux/<short dir or default>)

Application	Description
zynq_fsbl	Zynq First Stage Bootloader (Modified)
hello_world	TE0720 Xilinx Hello World Example
u-boot	Petalinux-Uboot (image.ub in prebuilt-folder,ex.:/os/petalinux/default)

Name	Folder	Description
Source Name	<design_name><folder>	Source Description
PetaLinux Project	<design_name>/os/petalinux	PetaLinux Project with Ethernet,USB,RTC

SoC Module with AMD Zynq™ 7030-1C, 1 GByte DDR3L, 32 MByte Flash, 4 x 5 cm

Product information "SoC Module with AMD Zynq™ 7030-1C, 1 GByte DDR3L, 32 MByte Flash, 4 x 5 cm"

Key Features

Recommended Software

Development Support

Scope of Delivery

Additional Information

Downloads

TEC0850 Basic Design

CR00100 Basic Example

CR00100 Basic Example

CR00103 Hyperram Citrobits

CR00103 Certus Test

CR00107 Basic Hello World Example

TE0802 Basic Linux Example

TE0802 Basic Linux Example

TE0802 Basic Linux Example

TE0802 Basic Linux Example

TE0950 Vitis AI Reference Design

TE0950 Basic Linux Example

TE0950 Basic Linux Example

TEI0022 Basic Example

TEI0022 Basic Example

TE0717 Hello World Example

TEI0001 Basic Example

TEI0001 Basic Example

TEI0001 Basic Example

TEI0001 Basic Example

TEI0001 Basic Example

TEI0001 Basic Example

TEI0003 LED Sequencer Example

TEI0003 NIOS SDRAM Example

TEI0003 Basic Example

TEI0003 Basic Example

TEI0003 Basic Example

TEI0003 Basic Example

TEI0003 Basic Example

TEI0010 Basic Example

TEI0010 Basic Example

TEI0010 Basic Example

TEI0010 Basic Example

TEM0001 Test Board Example

TEI0050 Basic Example

TEI0050 Basic Example

TEI0050 Basic Example

TEI0015 DAQ Capture Demo

TEI0015 Data Capture Demo

TEI0015 Jupyter Demo

TEI0016 DAQ Capture Demo

TEI0016 Data Capture Demo

TEI0016 Jupyter Demo

TEI0023 DAQ Capture Demo

TEI0023 Data Capture Demo

TEI0023 Jupyter Demo

TE0890 Hello World Example

TE0890 Hello World Example

ZynqberryZero Demo VIDEO/AUDIO Design with RPI video camera stream to monitor

Basic Linux Example

ZynqberryZero Demo VIDEO/AUDIO Design with RPI video camera stream to monitor

ZynqberryZero Demo VIDEO/AUDIO Design with RPI video camera stream to monitor

TEM0005 Webserver Demo1

MicroBlaze Basic-System

TE0725 HyperRAM Example

TE0725 Basic Example

TE0725 HyperRAM Example

TE0725 Basic Example

TE0725 HyperRAM Example

TE0725 Basic Example

TE0725 HyperRAM Example

TE0725 Basic Example

TE0725 Basic Example

TE0725LP Frequency Measurement

TE0725LP Basic Example

TE0725LP Basic Example

TE0725LP Basic Example

TE0725LP Basic Example

TE0725LP Basic Example

TE0714 VIO LED Design

TE0714 Basic Barmetal Example

TE0763 Hello World Example