Skip to main content Skip to search Skip to main navigation

FPGA Module with AMD Kintex™ 7 XC7K325T-2IF, 4 x 5 cm standard footprint

Product information "FPGA Module with AMD Kintex™ 7 XC7K325T-2IF, 4 x 5 cm standard footprint"

This product is offered at a discount because there is already a successor.
Only valid while stocks last!

The predecessor of this article is TE0741-02-325-2IF. All changes are in the Product Change Notification (PCN).

The successor of this article is TE0741-04-D2I-1-A. All changes are in the Product Change Notification (PCN).

The Trenz Electronic TE0741-03-325-2IF is an industrial-grade FPGA module integrating a Xilinx Kintex-7 325T FPGA, 8 MGTs (Multi Gigabit Transceivers) and 32 MByte Flash memory for configuration and operation, and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/Os is provided via rugged high-speed stacking strips.

All this on a tiny footprint, smaller than a credit card, at the most competitive price. Modules in 4 x 5 cm form factor are fully mechanically and largely electrically compatible among each other.

All parts are at least industrial temperature range of -40°C to +85°C. The module operating temperature range depends on customer design and cooling solution. Please contact us for options.

Key Features

  • Xilinx Kintex-7 FPGA XC7K325T-2FBG676I
  • 256 MBit (32 MByte) Quad-SPI Flash memory (for configuration and operation) accessible through:
    • FPGA
    • JTAG port (SPI indirect)
  • 8 MGTs (multi gigabit transceivers)
  • FPGA configuration through:
    • JTAG (B2B connector)
    • SPI Flash memory
  • 25 MHz low jitter oscillator with shutdown control
  • Programmable quad clock generator (Silicon Labs Si5338)
  • On-board high-efficiency DC-DC converters
    • MGT voltage regulators with control enable
    • Core voltage regulators: up to 24 A (variants depend)
    • Supply voltages: either 3.3 V or 3.3 V and 5 V
  • Plug-on module with 2 x 100-pin and 1 x 60-pin Razor Beam High-Speed hermaphroditic Terminal/Socket Strips (regular 4 mm)
  • 144 single-ended FPGA I/O pins available on B2B strips
  • 2 x user LEDs, 1 x DONE FPGA pin LED
  • AES bit-stream encryption
  • Evenly spread supply pins for good signal integrity

Other assembly options for cost or performance optimization plus high volume prices available on request.

Recommended Software

Vivado Enterprise Edition (paid version)

The Vivado Enterprise Edition is the full-featured version of the design suite and supports all AMD devices.

Overview Vivado Standard and Enterprise Edition

Development Support

There are different base boards available for this module.

Latest documentation, design support files and reference designs with source files are available for download free of charge.

Scope of Delivery

  • 1 x TE0741-03-325-2IF Trenz Electronic 4 x 5 cm FPGA module with Xilinx Kintex-7 325T
  • 8 x screws
  • 4 x bolts

Additional Information

All modules produced by Trenz Electronic are developed and manufactured in Germany.

Downloads

Digilent
OHO-Elektronik
Sundance
Trenz_Electronic - Documents and Design files for Trenz Electronic Products